Key Job Responsibilities: Gather requirements, perform system analysis finalize technical and functional specifications Design interfaces in JDA WMS using Integrator, DDA Development, MOCA Programming, Reports. Interface Design and Knowledge on Interface mappings between HOST and JDA Fully accountable for modification development, quality delivery and communication with customers on modifications.
Key Job Responsibilities: Gather requirements, perform system analysis finalize technical and functional specifications Design interfaces in JDA WMS using Integrator, DDA Development, MOCA Programming, Reports. Interface Design and Knowledge on Interface mappings between HOST and JDA Fully accountable for modification development, quality delivery and communication with customers on modifications.
Aufgaben Managing Sales development in dedicated Sales Area in PolandCoordinating tenders for customersPreparing and submitting reportsDeveloping reports on the results of the negotiations and meetings held with customersTaking part in meetings in factories and on all kinds of fairs and seminarsCoordinating commercial, service and engineering activities with customersConducting market analysis and finding new sales opportunitiesTeaching about Calvatis product innovations and technological solutions; taking part in qualifications raising trainingTechnological and consulting visits – within the scope of contract with a customerContribution to improvement of processes in territoryAssuring timely payments from customersCreating annual sales and service plan Anforderungen Master or bachelor’s degree (preferred: food technology, technical, chemistry)Previous sales experience in B2B sales highly desiredKnowledge of the market of professional cleaning and equipment is a big plusIntermediate PC skillsGood English or/and German skills (speaking and writing)Full driving license BWillingness to travel within Poland and stay in hotels 3-4 nights per week is unavoidableFriendly and courteous appearanceIndependent time/appointment managementQuick learner, structured work, Loyalty to customers and employersWell-organized with excellent multi-tasking abilitiesReliability, resilience and flexibilityTeamwork and communication skills Über uns Adequate and performance-based incomeAttractive yearly bonusCompany carGeat assistance in the back office at HQTrainings in Poland and abroadMobile communicationA long-ranging employmentCareer advancement with further education opportunitiesPleasant working environment with flat hierarchies and short decision Calvatis GmbH - motivated employees with expertise and passion who together make up the success of the company.
RRC Power Solutions Vietnam plays a key role in our global manufacturing and quality strategy and works in close alignment with our headquarters in Germany.The Production Process Engineer is responsible for ensuring successful execution of production activities. The focus is on technical and process issues: Plan, organize and execute efficient equipment and process Maintenance to ensure excellent manufacturing processes.
Familiarity with the constraints of physical product development (tooling, BOM, lead times) compared to pure software CyclesGood negotiation skills to protect the team's focusExceptional ability to bridge the gap between technical engineering teams and non-technical stakeholders or clientsMethodology: Knowledge of Agile frameworks (SAFe/Scrum/Kanban) and their application in regulated hardware environmentsFamiliar with Azure DevOps / SAP / Google toolsLanguages: Fluency in English and German (written and spoken) is required.
Lead and continuously improve the GMP self-inspection program, including annual planning and executionCoach SMEs and audit teams to ensure strong inspection and self-inspection readinessPerform gap assessments on global procedures and drive alignment across site functionsCoordinate cross-functional activities and ensure effective communication with all departmentsSupport internal, external, and mock audit preparation, including document review and QA inputAct as backroom/ACC or scribe team member during audits and inspectionsServe as Data Integrity Champion and ensure consistent DI implementation across the sitePrepare and present compliance topics to the Quality Council and site leadershipSupport continuous improvement initiatives and coordinate operational activities within the compliance teamAct as back-up for the Quality Compliance & Systems Expert when required University degree in biochemistry, chemistry, engineering, or another relevant scientific/technical disciplineSolid experience in biotechnology and/or pharmaceutical industryStrong knowledge of GMP requirements and Quality SystemsUnderstanding of manufacturing, QC laboratory, and warehouse processes for biological productsSolid knowledge of Good Documentation Practices (GDDP) and Data Integrity principlesExperience supporting audits and regulatory inspectionsSkilled in writing, reviewing, and updating SOPs and technical documentationFamiliarity with risk management tools (FMEA, RCA, etc.)Proficiency in French and English (minimum B2)Experience with eQMS tools (e.g., Veeva Vault, TrackWise), Microsoft Office, SharePoint, and Power BI A very renowned companyContinuous support during the assignmentIndividual all-round care: Support throughout the entire application phase Ihr Kontakt Referenznummer 864224/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
Requirements: Graduate Software Engineer (or equivalent knowledge and skills acquired by other means)Experience in Software Development for at least 3 yearsGood English capabilities, both spoken and written, at least B2 (CEFR)High flexibility and adaptabilitySpecification of high level and low level software requirements (SRS, SDDD)Technical reviewsProgramming experience in C and/or Assembler Code What we offer: Future prospects in an innovative, growing, and agile companyAn exciting work environment with diverse career opportunitiesA tariff/above-tariff salaryFlexible working hours and the option for remote work30 vacation days per year and special leave for special occasions upon employment at Xtended EngineeringBonus programs for referrals and employee recruitmentTeam events Xtended Engineering GmbH bringt qualifizierte Ingenieure mit Unternehmen aus der Industrie und Wirtschaft zusammen.
Maintain and troubleshoot data integration pipelines to ensure stable data flow into AI and analytics systems Support model development by assisting with training, validation, and optimization of machine learning workflows Conduct data analysis to extract insights and provide clear reports supporting R&D research questions Solve technical challenges related to data access, pipeline performance, and software limitations Ensure continuity of ongoing projects by aligning closely with the core team and delivering on timelines Perform image analysis and prepare datasets required for scientific and ML use cases Manage and improve ETL processes to ensure data quality, structure, and availability Document workflows, pipeline changes, and analytical steps to ensure clarity and reproducibility Academic background in computer science, data science, engineering, or a related quantitative field Strong proficiency in Python with expertise in scientific and analytical libraries Skilled in SQL and working with relational databases Understanding of ETL concepts and practical experience working with data pipelines Solid foundation in machine learning principles and model lifecycle Ability to perform image analysis for scientific or research applications Strong communication and interpersonal skills with the ability to collaborate in a technical team Independent, structured problem-solver with a commitment to clear documentation and FAIR data practices Opportunity to contribute directly to active R&D projects with immediate real-world impact Hands-on involvement in AI, machine learning, and data integration challenges in a scientific environment Close collaboration with a small, highly skilled technical team Ihr Kontakt Referenznummer 863771/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
Develop new documentation: Develop clear and concise documentation that meets users' needs. Validate technical details: Work with engineers and technicians to ensure the technical detail is correct through observation and hands-on testing in our lab.
Please feel free to contact usYour Profile BS in Engineering, or similar technical discipline.Two (2) years related experience in a manufacturing environment, preferably in the field of optics.Ability to interpret technical drawings and specifications.Working knowledge of GD&T and how to evaluate.Hands on experience with manual measurement tools (calipers, micrometers, indicators, etc.) and electronic measurement equipment (vision systems, optical microscopes, comparators, etc.).Experience in product and process audits.Experience in following / maintaining an ISO 9001, 13485, AS9100 Quality Management System.Strong analytical ability and a disciplined problem-solving approach.
Construction Engineer / Construction Manager in the Dismantling of Nuclear Facilities (m/f/d) Einsatzort: Ispra, Italien Kennziffer: 2025-1316 Arbeitszeit: Vollzeit (unbefristet) Aufgaben Planning of technical projects in the dismantling of nuclear facilities (domestic and international)Preparation of schedules, budget plans and resource plans, including monitoring them for compliance and taking appropriate countermeasures in the event of deviationsLeading the project team and leading project team meetingsExamination of externally prepared planning and application documents, specifications and tender documentsIndependent coordination with planners, surveyors/experts, executing companies and other parties involved in the planningOrganisation and participation in acceptance tests / factory acceptances, detection and intervention in the event of deviations as well as organisation and monitoring of commissioning and cold handlingReporting and participation in work consultations, schedule discussions and other discussions Profil Completed studies in civil engineering or completed training as a state-certified civil engineer. or Construction technician with experience or equivalentStrong technical understandingConfident appearance, negotiation skills, organizational talent and assertivenessSound MS Office skills round off your profileExcellent knowledge of English and Italian desirablePractical experience in construction works, dismantling, or operational nuclear engineering Willingness to travel to the project location in Italy at least once a month Wir bieten A crisis-proof full-time job with a permanent employment contractThe option of hybrid working including Homeoffice Holiday and Christmas bonusExtensive induction by experienced colleaguesA wide range of training and development opportunities in a secure group of companiesEmployee conditions with discounted offers, e.g.: Membership in over 4,500 fitness studios via EGYM Wellpass and job bikeConclusion of an attractive BU (occupational disability insurance) + company pension scheme Have we aroused your interest?
Landeshauptstadt München sucht in eine/n DevOps Engineer mit den Schwerpunkten Operations und Technical Management (w/m/d) (ID-Nummer: 13746555)
Your tasks: Lead and manage the commissioning team throughout the full execution of gas turbine and combined cycle power plant (CCPP) startupsDevelop and oversee the commissioning strategy, schedule and budget from planning through to customer handoverEnsure all activities are carried out in compliance with EHS requirements and defined safe systems of workCoordinate contractual acceptance tests with the customer and manage punch list items through to completionMonitor project milestones and ensure on-time, on-budget delivery in close coordination with Site Manager and Project ManagementEnsure quality compliance across all commissioning activities, including inspections, tests and witness points as contractually requiredIdentify and resolve technical issues proactively, escalating where necessary and driving non-conformity follow-upManage system turnover from construction to commissioning and execute final handover to the customer in line with contract requirements Your qualification: Engineering degree from an accredited universityProven commissioning experience with strong technical knowledge of gas turbines and combined cycle power plants (CCPP)Experience in leading teams of supervisors and technicians through pre-commissioning and commissioning activities independentlyStrong analytical and problem-solving skills with the ability to identify and resolve technical issues on siteSolid understanding of project risk management and mitigation planningExcellent communication and presentation skills with a strong team-oriented mindsetFluent in spoken and written English We offer you: Competitive remuneration Flexible working hours and home office options Opportunities for professional development and training Great working atmosphere and a highly motivated team Show us what drives and motivates you - apply now and become part of our inspiring corporate culture!
Analyze system requirements and assess the feasibility of testing in simulated environments as well as in vehicles Design and develop test cases for system requirements, particularly for IVI systems including navigation, telematics, and streaming services Execute integrated system tests on test benches and in-vehicle environments Take ownership of key test milestones, such as quality audits and final release gate checks for new vehicle platforms Collaborate closely with Tier-1 suppliers and coordinate activities with our R&D headquarters in Korea Track issues and manage bug fixes using JIRA, ensuring alignment with vehicle line timelines and software release plan Review and challenge technical solutions with a focus on system performance and market competitiveness Identify improvement opportunities based on European market trends and actively support their implementation Bachelor’s or Master’s degree in Computer Science, Engineering, Electrical Engineering, or a related field Practical experience conducting driving tests within the EU region, ideally in the area of automotive infotainment validation Experience in system validation, preferably covering navigation, connected car services, and streaming applications Familiarity with configuration management and version control tools Basic knowledge of data analytics is an advantage Strong planning and organizational skills with a structured working approach High level of flexibility and motivation to work in an international and cross-cultural environment Very good command of the English language, both written and spoken Willingness to travel and conduct driving tests; valid European driving license (Category B) required Pleasant working atmosphere Challenging and varied tasks in a promising and innovative industry Dynamic and innovative market environment A highly motivated team and an open communication styleAngenehmes Arbeitsklima Ihr Kontakt Ansprechpartner Annika Chrysant Referenznummer 858521/1 Kontakt aufnehmen E-Mail: annika.chrysant@hays.de Anstellungsart Anstellung bei der Hays Professional Solutions GmbH
Including TBT’sEscalation of Specialist Vendor performance issues, detailing accurately the areas of performance concerns.Ensure technical / legislative updates are effectively communicated with all team members.Maintain minimum levels of resourcing onsite, support the arrangement of suitable cover/replacement.Liaise with the supply chain, when ordering M&E components for remedial works.management in line with the account training matrix.
About us Your Contribution Perform comprehensive failure analysis using advanced tools and techniques.Analyze complex problems using quality tools and interpret data for actionable insights.Maintain FA tracking lists, equipment logs, and ensure laboratory safety and organization.Interface with process owners to understand key processes and failure mechanisms.Source and manage external laboratories for advanced FA capabilities.Provide clear documentation and publish detailed analysis reports.Participate in cross-functional meetings to communicate findings.Perform data analysis to support root cause investigations and trend monitoring.Support ISO9001, ISO14001, ISO45001 & IATF16949 system implementation.Share technical knowledge to develop team capabilities. Your Profile Bachelor’s Degree in Engineering, Science, or Mathematics.2–5 years in manufacturing with hands-on failure analysis experience.Proficiency in failure analysis techniques and tools (e.g., SEM/EDX, AFM, FTIR, IC, ICP, GC-MS).Basic knowledge of QM tools and quality assurance methods (Gage R&R, MSA, SPC, FMEA).Familiarity with ISO standards and data analysis principles.Strong communication, analytical, and problem-solving skills.Detail-oriented, result-driven, and able to work collaboratively.
Work in an international, multicultural environment alongside leading engineering experts, where innovation meets precision and sustainability. This role offers you the opportunity to develop deep technical expertise in item designation and asset management while collaborating with global teams, customers, and partners on mission-critical projects that shape the energy transition.
Job description / Your role: Serve as the responsible project manager for customer programs, ensuring alignment with scope, timelines, and quality expectations Take a leading role in preparing technical and commercial proposals for customer projects Manage the planning and scheduling of projects, including allocation of resources, budgeting, and timeline control in accordance with established project management standards Assume full ownership of assigned projects, ensuring delivery on time, within budget, and to the highest quality standards Take responsibility for the risk management according to space standards Create and maintain comprehensive project documentation, including customer-facing documents and internal reports Plan, host, and manage internal and external project reviews to monitor progress and ensure stakeholder alignment Supervise and guide project team members, ensuring clear roles, responsibilities, and collaboration within the dedicated project team Join us in shaping the future of space technology, as we move from single-piece manufacturing to scalable, industrial production.
To succeed, you will need Education: Engineering/science degree or technical equivalent (engineering related job experience) Skills & Knowledge: Skilled at generating your own leads through cold calling, blitzing, research, networking, and driving your territory Experience with on-site customer facing role Excellent interpersonal, oral, and written communication skills Knowledge of or ability to learn and communicate technical information Ability to create custom solutions to address specific process needs by bringing together the needed company technical resources is a must.
About us Your Contribution Act as a technical expert for metrology and measurement systems.Review engineering drawings for measurability and define measurement methods.Perform advanced measurement and inspection, including programming complex tools (e.g., VMM).Conduct Gage R&R and Measurement System Analysis (MSA).Evaluate, select, and qualify new metrology equipment for technology development.Drive continuous improvement in measurement tool stability, capability, and capacity.Define calibration and maintenance activities for measurement equipment.Perform correlation studies with customers/suppliers on critical parameters.Train production personnel on measurement methods and equipment.Develop and maintain metrology documentation and SOPs.Automate measurement data extraction and organize for end-user accessibility.Manage metrology-related projects, set milestones, and monitor resources.
You support our technical training team by organizing materials, managing equipment, and helping to digitize and improve training content. In this role, you work closely with trainers, contribute to efficient workshop operations, and help develop structured and modern training documentation.
Lead and coordinate electrical system aspects within interdisciplinary projects, acting as a key interface between electrical and mechanical teams Design electrical systems tailored to project requirements, ensuring compliance with relevant standards and regulations (e.g., EMC, high voltage) Assess feasibility of customer requirements from both electrical and mechanical perspectives, contributing to solution development Prepare and conduct verifications and reports, maintaining close collaboration with technical project leaders and customers Manage quality and financial aspects related to electrical components of projects Quickly acquire knowledge in new technical areas and retrieve necessary information independently Support multidisciplinary teams, including constructors using Siemens NX, ensuring effective information exchange and understanding of interfaces Utilize tools such as SAP (for reporting and documentation), E3 or equivalent ECAD software for electrical schematics and connection plans Profound knowledge and in-depth experience in electrical engineering or electronics background (FH, Bachelor, Master level acceptable) Broad expertise in electrical systems implementation, including multimedia devices, IT networking basics, high voltage systems, and applicable standards Ability to understand mechanical interfaces and their interrelations with electrical components Fluent German and English skills to handle internal documentation and customer communication effectively Proficient in SAP and MS Office applications; experience with Siemens NX or similar CAD systems is a strong advantage Strong social skills, technical curiosity, and the ability to think beyond standard solutions to meet specific customer needs Proven ability to work on complex projects with fluctuating and unpredictable daily tasks, demonstrating flexibility and rapid adaptation Experience in the defence industry or similar high-security, high-complexity environments Familiarity with environmental simulation and electromagnetic compatibility (EMC) testing Knowledge of network-related topics in the IT context, even if not a dedicated network specialist Previous work involving customers and cross-disciplinary project leadership Willingness to work full-time (80–100%) and readiness to commit to a temporary contract with prospects for extension or permanent placement Ihr Kontakt Referenznummer 859533/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
You support our technical training team by organizing materials, managing equipment, and helping to digitize and improve training content. In this role, you work closely with trainers, contribute to efficient workshop operations, and help develop structured and modern training documentation.
OpenAPI) ·5+ years of experience in overall software development lifecycle ·Familiarity with using CD/CI tooling such as Git, Jenkins and Maven Passion about great customer experienceGood communication skills to sometimes explain your work to a non-technical audienceExcellent written and spoken English; we’re an international team An ideal candidate would also have: ·Basic knowledge of Virtual Assistant technologies (e.g.
Local community and general public sales budgets and forecasts: track sales and service performance, prepare and implement country budgets according to group wide guidelines, provide regular reports on sales result, risks and opportunities Your Qualifications Technical /engineering background Formal education: Degree in Business, Sales, Marketing or a related Field. Experience: 8+ years of sales experience, proven track record of achieving sales and business goals at country or regional level Strong experience managing sales and service teams and distributors Deep understanding of local market and business environment Strong leadership and people management skills Excellent negotiation, communication, relationship building and representation skills Financial and commercial acument Fluent in French and English Benefits Innovative and international working environment Challenging and diversified job Working in a highly motivated team Strong company group Attractive remuneration Social benefits Location: Tunis ǀ Tunis ǀ Tunesien
Local community and general public sales budgets and forecasts: track sales and service performance, prepare and implement country budgets according to group wide guidelines, provide regular reports on sales result, risks and opportunities Your Qualifications Technical /engineering background Formal education: Degree in Business, Sales, Marketing or a related Field. Experience: 8+ years of sales experience, proven track record of achieving sales and business goals at country or regional level Strong experience managing sales and service teams and distributors Deep understanding of local market and business environment Strong leadership and people management skills Excellent negotiation, communication, relationship building and representation skills Financial and commercial acument Fluent in French and English Benefits Innovative and international working environment Challenging and diversified job Working in a highly motivated team Strong company group Attractive remuneration Social benefits Location: Tunis ǀ Tunis ǀ Tunesien
Expected Outcomes: A fully or partially automated setup capable of testing and qualifying FAUs according to defined optical and mechanical specifications.A software tool for measurement automation and data processing.A technical report including setup design, validation results, and recommendations for further optimization. Keywords: Fiber array units, optical testing, automation, alignment, mechanical qualification, photonic packaging, precision metrology.
Strong communicator: You can communicate transparently, honestly, and effectively with both technical and non-technical stakeholders (e.g. Product, Design). Team player: You actively share knowledge, inspire other team members, and aim to fulfill team goals.
The position is part of an international engineering environment with a strong focus on safety and technical accuracy. YOUR TASKS • Monitor and analyze the operational performance of pitch and yaw bearings in wind turbine applications • Investigate reliability metrics and field data to identify risks and improvement potential in bearing systems • Perform and develop root cause analyses for pitch and yaw bearing failures and deviations • Support the mechanical design of pitch and yaw bearings, including DFMEA, technical specifications, and validations • Contribute to supplier qualification and technical assessments for pitch and yaw bearing manufacturers • Collaborate with quality, design, and service teams to ensure stable bearing performance across the product lifecycle YOUR PROFILE • Master’s degree in mechanical engineering or a comparable engineering discipline, or equivalent • At least five years of professional experience in the wind turbine industry with a focus on pitch and yaw bearings • Solid understanding of bearing design, reliability engineering, and mechanical analysis methods • Knowledge of quality assurance and problem-solving methodologies is an advantage • Experience working in international, cross-functional engineering teams with clear communication skills • Fluent English required, with German and/or Spanish skills considered a plus • Willingness to travel occasionally and able to manage technical topics in parallel with an analytical approach YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
Metabowerke GmbH sucht in eine/n MS Dynamics BC / NAV– Technical Consultant (job for all genders) (ID-Nummer: 13697802)
The position is part of an international engineering environment with a strong focus on safety and technical accuracy. YOUR TASKS • Monitor and analyze the operational performance of pitch and yaw bearings in wind turbine applications • Investigate reliability metrics and field data to identify risks and improvement potential in bearing systems • Perform and develop root cause analyses for pitch and yaw bearing failures and deviations • Support the mechanical design of pitch and yaw bearings, including DFMEA, technical specifications, and validations • Contribute to supplier qualification and technical assessments for pitch and yaw bearing manufacturers • Collaborate with quality, design, and service teams to ensure stable bearing performance across the product lifecycle YOUR PROFILE • Master’s degree in mechanical engineering or a comparable engineering discipline, or equivalent • At least five years of professional experience in the wind turbine industry with a focus on pitch and yaw bearings • Solid understanding of bearing design, reliability engineering, and mechanical analysis methods • Knowledge of quality assurance and problem-solving methodologies is an advantage • Experience working in international, cross-functional engineering teams with clear communication skills • Fluent English required, with German and/or Spanish skills considered a plus • Willingness to travel occasionally and able to manage technical topics in parallel with an analytical approach YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
Your Background and Skills Include: Bachelor’s degree in related field required Six years related experience, including program development and management, change management, and training required Strong Technical Claims knowledge in related field required Staff management and motivational capabilities required Strong negotiation skills required Contract Analysis required Excellent written and verbal communications skills at all levels required Strong presentation skills required Strong Business Partner and customer service focus required Trend analysis, quantitative analysis skills required RMIS system and Dbase management experience required Contract language understanding required Professional certification and/or licensure as applicable preferred DHL is an equal opportunity employer.
Lead the end-to-end execution of the deployment plan for the assigned market from preparation to hypercare completionBuild a strong partnership with local leadership, acting as the single point of contact for all implementation topicsGuide and coordinate the local implementation squad to ensure alignment, motivation, and effective issue resolutionTrack and report business and technical readiness, proactively managing risks and resolving blockersSafeguard business continuity by planning and overseeing a smooth cutover and go-liveCoordinate delivery of local training and change activities, ensuring strong user adoptionRepresent local needs, challenges, and priorities to the central program to support aligned decision-makingEnsure consistent communication, expectation management, and stakeholder alignment across all involved teams Academic background in business, IT, or a related field, or equivalent practical experienceExperience delivering large-scale implementations or complex transformation programsStrong understanding of market-level operations, business processes, and cross-functional ways of workingAbility to lead and motivate distributed teams without direct hierarchical authorityHands-on problem-solving mindset with the ability to manage on-the-ground challengesExceptional communication and stakeholder-management skills with the ability to build trust quicklyExperience supporting training, change initiatives, and user-adoption activitiesAbility to travel internationally to support key deployment milestones Opportunity to drive a high-visibility, global transformation with strategic business impactClose collaboration with senior stakeholders and international cross-functional teamsA role combining leadership, strategy, and hands-on execution in a dynamic environment Ihr Kontakt Referenznummer 863248/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
Collaborate to enhance and optimize system functionality. Be the Expert: Serve as the go-to functional/technical advisor for our clients. Rethink Retail: Stay in front of emerging trends, analyze, and design next-gen business processes across omnichannel environments.
And we are looking for a real Tool Rebel with immediate effect to join us as Sales Representative in Hungary full of enthusiasm and excitement to actively shape the future of Wera.You support the development of sales activities with new and existing customers, and you thrill them for our productsThe acquisition of new customers and the development of new sales channels are part of your tasks as the permanent market and customer analysis, whereby you report regularly to the Regional Sales ManagerTogether with our customers and with the help of our specially developed software, you create new designs for sales walls and support the optimisation of sales conceptsYou ensure the implementation of the Brand Wera as well as the local Tool Rebel and product strategyYou work closely with the sales office and marketing department in Germany and supporting product trainings, international trade fairs, demo days and contributing to social media activitiesAs a sales representative you are often on the road to be close to the customer, to be able to offer the best service and to represent Wera to the Hungarian market (a driving licence is mandatory) You have successfully completed a commercial or technical apprenticeship or have a comparable qualificationYou already have several years of successful professional experience in promotion (ideally in the tool industry), whereby you have a high affinity for the sale of technical productsAnalysing markets is not new for you as well as creating and implementing concepts, you work efficiently, systematically and goal-oriented plus manage to keep an eye on the goals to be achievedWith your fluent Hungarian and English skills (written and spoken) as well as your open and trustworthy personality you communicate confidently at all levelsYou have a strong IT affinity, are flexible, have a high level of commitment and work independently, but are also a team playerLike the Tool Rebels, you are creative and challenge the status quo, have a high quality standard and are characterised by your problem-solving abilityYou live in Hungary (ideally Budapest) and you are used to spending a large part of your working hours in the fieldYou will become one of the famous Tool Rebels at an excellent TOP innovator companyWe offer you an emotionally rousing "we" feeling in an open corporate cultureYou will take responsibility for optimising our processes and help us work on a successful futureYou can actively influence markets and sales with your creativity and commitmentYou will have the opportunity to participate in trainings to develop yourself personally and professionally plus you will receive a laptop, a company car and a competitive salary with extrasOur economic situation has been developing successfully for years and makes us independent If we have whetted your appetite, we look forward to receiving your application.
Execute system integration testing within the IFX environment (Camstar / Opcenter)Support User Acceptance Testing (UAT) in alignment with business and functional requirementsParticipate in the factory integration rollout based on Infineon’s SOPs and standardsProvide post-stabilization support, including incident and problem management to reduce business impactHandle incident tickets according to SLA priorities (Critical / High / Medium / Low)Support root cause analysis and technical investigations during incidentsPrepare weekly status reports for the SAP Manufacturing System project teamCreate and document test cases, test reports, and UAT documentation Strong hands-on experience with Infineon productsProven practical experience with Camstar / Opcenter Solid knowledge in system testing, integration testing, and UAT preparationExperience with incident & problem management, including RCA methodologiesStrong understanding of business flows, functional specs, and manufacturing processesExcellent analytical and documentation skillsFluent English communication skills (international project environment) You will work in an international environmentA very renowned companyInteresting tasks in a multinational environment Ihr Kontakt Referenznummer 863788/1 Kontakt aufnehmen Telefon:+ 49 621 1788-4297 E-Mail: positionen@hays.de Anstellungsart Freiberuflich für ein Projekt
#shapeandcreate Your responsibilities: Conception, design, and implementation of technical solutions in the SAP S/4HANA Finance environment.Customization and further development of the SAP S/4HANA Finance system.Development of ABAP/ABAP OO programs for the automation and optimization of business processes.Analysis of business requirements and creation of technical specifications.Close cooperation with specialist departments and other IT teams.Testing and documentation of the developed solutions.Error analysis and troubleshooting in the SAP S/4HANA Finance system.
OpenAPI) • 5+ years of experience in overall software development lifecycle • Familiarity with using CD/CI tooling such as Git, Jenkins and Maven • Passion about great customer experience • Good communication skills to sometimes explain your work to a non-technical audience • Excellent written and spoken English; we’re an international team An ideal candidate would also have: • Basic knowledge of Virtual Assistant technologies (e.g.
Your contribution is key to successful project delivery and compliance with all safety and technical requirements. YOUR TASKS You take full on-site responsibility for the construction site, ensuring safe, timely, and high-quality execution from delivery to commissioning You actively support the Project Manager in planning, site setup, execution, scheduling, cost control, and project reporting You coordinate and supervise civil and electrical works, plan resources, and ensure availability of tools, equipment, and materials You act as the primary on-site contact for customers, suppliers, and internal stakeholders You lead subcontractors, service providers, installation teams, crane operators, and transport companies, ensuring clear instructions and smooth workflows You ensure strict compliance with safety, environmental, and technical requirements, including risk management and proper documentation YOUR PROFILE Technician or master craftsman qualification in mechanical or electrical engineering, a technical vocational training, or an equivalent qualification Several years of experience in construction site management, preferably in wind energy or comparable large-scale technical projects Confident use of MS Office, ideally MS Project, and fluent English skills at least at B2 level according to CEFR, basic German (B1 level) Structured, assertive, and solution-oriented working style with a high level of responsibility and strong teamwork skills Willingness to travel mainly within Germany and occasionally to neighboring countries such as Austria, the Netherlands, Switzerland, or Luxembourg Willingness to undertake multi‑week assignments on construction sites as well as regular Saturday work We welcome applications from all regions; your place of residence does not matter as long as it is within Germany.
YOUR TASKS: Independently plan, structure, and execute technically complex aerodynamic design projects, including the development of new rotor blades and the detailed analysis of legacy designs Applying advanced fluid dynamics principles, leveraging high-fidelity simulation tools, and integrating multidisciplinary constraints to achieve optimal aerodynamic performance Development and continues improvement of prediction methods and industrialization of research approaches and methods Aerodynamic design, evaluation and optimization of wind turbine rotor blades Prepare and present technical results in engineering review meetings and communicate key findings, risks, and recommendations to senior management and other decision‑making stakeholders Automation of methods within the framework of in-house design tools Validation of results and method tuning using measurement data YOUR PROFILE: Master’s degree in Mechanical or Aeronautical Engineering, or a closely related field; a PhD is a strong advantage, particularly with specialization in aerodynamics Minimum of 5-8 years of professional experience in aerodynamic design or related engineering fields, ideally within the wind energy sector or similar industries involving complex fluid dynamics applications Strong organizational mindset with demonstrated ability to manage complex engineering projects from concept to execution Proficient in engineering programming, with hands-on experience in languages such as Python, C/C++, and MATLAB, applied to simulation, data analysis, and tool development Fluency in English is required; proficiency in German or Spanish is considered a plus Self-organized and self-driven personality with the ability to handle complex problems Ability to work in a multi-lingual, multi-locational and multicultural team YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
You will manage complex, cross‑functional engineering projects from concept through serial production, ensuring technical excellence and strategic alignment. Acting as a central interface across multiple departments, you will drive development efficiency, manage risks, and ensure delivery of high‑quality turbine solutions.
Your contribution is key to successful project delivery and compliance with all safety and technical requirements. YOUR TASKS You take full on-site responsibility for the construction site, ensuring safe, timely, and high-quality execution from delivery to commissioning You actively support the Project Manager in planning, site setup, execution, scheduling, cost control, and project reporting You coordinate and supervise civil and electrical works, plan resources, and ensure availability of tools, equipment, and materials You act as the primary on-site contact for customers, suppliers, and internal stakeholders You lead subcontractors, service providers, installation teams, crane operators, and transport companies, ensuring clear instructions and smooth workflows You ensure strict compliance with safety, environmental, and technical requirements, including risk management and proper documentation YOUR PROFILE Technician or master craftsman qualification in mechanical or electrical engineering, a technical vocational training, or an equivalent qualification Several years of experience in construction site management, preferably in wind energy or comparable large-scale technical projects Confident use of MS Office, ideally MS Project, and fluent English skills at least at B2 level according to CEFR, basic German (B1 level) Structured, assertive, and solution-oriented working style with a high level of responsibility and strong teamwork skills Willingness to travel mainly within Germany and occasionally to neighboring countries such as Austria, the Netherlands, Switzerland, or Luxembourg Willingness to undertake multi‑week assignments on construction sites as well as regular Saturday work We welcome applications from all regions; your place of residence does not matter as long as it is within Germany.
YOUR TASKS: Independently plan, structure, and execute technically complex aerodynamic design projects, including the development of new rotor blades and the detailed analysis of legacy designs Applying advanced fluid dynamics principles, leveraging high-fidelity simulation tools, and integrating multidisciplinary constraints to achieve optimal aerodynamic performance Development and continues improvement of prediction methods and industrialization of research approaches and methods Aerodynamic design, evaluation and optimization of wind turbine rotor blades Prepare and present technical results in engineering review meetings and communicate key findings, risks, and recommendations to senior management and other decision‑making stakeholders Automation of methods within the framework of in-house design tools Validation of results and method tuning using measurement data YOUR PROFILE: Master’s degree in Mechanical or Aeronautical Engineering, or a closely related field; a PhD is a strong advantage, particularly with specialization in aerodynamics Minimum of 5-8 years of professional experience in aerodynamic design or related engineering fields, ideally within the wind energy sector or similar industries involving complex fluid dynamics applications Strong organizational mindset with demonstrated ability to manage complex engineering projects from concept to execution Proficient in engineering programming, with hands-on experience in languages such as Python, C/C++, and MATLAB, applied to simulation, data analysis, and tool development Fluency in English is required; proficiency in German or Spanish is considered a plus Self-organized and self-driven personality with the ability to handle complex problems Ability to work in a multi-lingual, multi-locational and multicultural team YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
You will manage complex, cross‑functional engineering projects from concept through serial production, ensuring technical excellence and strategic alignment. Acting as a central interface across multiple departments, you will drive development efficiency, manage risks, and ensure delivery of high‑quality turbine solutions.
Responsible for all aspects of Material Master for the global template and for MDG-M Review all Requirements for clarity and for support of harmonized approach Drive, oversee, guide and assist the technical developers Test all requirement implementations Involved in all aspects of PLM Interfaces for each of the PLM Systems With each roll out the above topics must be addressed in different ways including migration With regards to migration: manage clones, collisions, duplicates for every S4E-Unify and Agora Roll Out Provide demonstrations on MDG-M functionality, oversee the Data Quality module and its implementation relative to KPI’s and management of KPI results Bachelor’s degree in computer science, Business Management, Management Information Systems or equivalent experience Experience in business process design in material management and production planning Expert knowledge about PP, MM, MDG-M, processes and customizing in SAP S/4 HANA Experience and the ability to read ABAP code / debugging are desirable Ability to meet business requirements through the standard solution used Excellent with troubleshooting and analytical skills 10-20% business travel (international and domestic) is expected Languages: English, German (optional) Exciting Global Projects: Be part of a major international SAP S/4HANA transformation program Hybrid Work Model: Flexible working hours and remote work options depending on project needs Professional Development: Opportunity to work with cutting-edge technologies and gain experience in SAP S/4HANA, MDG-M, and PLM interfaces International Environment: Collaborate with global teams across different countries and cultures Modern Workplace: Access to Siemens Energy’s innovative and sustainable office infrastructure Networking Opportunities: Work alongside experts in energy, digitalization, and transformation Gehaltsinformationen 120000 Ihr Kontakt Ansprechpartner Julian Hientz Referenznummer 847518/1 Kontakt aufnehmen E-Mail: julian.hientz@hays.de Anstellungsart Anstellung bei der Hays Professional Solutions GmbH
Marketing & Sales Technical Sales Engineer ANZ (m/f/d) as of April 2026 from Home Office in Australia Your Job Pre-Sales Field Activity Technical Sales Presentations and hands-on training with customers Mapping out the wishes and technical requirements of our clients Communication in a documented format to the right people within the company Filtering of the right and feasible projects Taking care of sustainable growth of the sales region Customer responsibility Your Profile Bachelor's degree in Business, Engineering, Information Technology or related field Minimum 3+ years experience in camera surveillance, security systems or sensor technology Strong presentation skills Willingness to travel frequently (approx. 50%) across the region A natural sense of business and customer orientation Passion, enthusiasm and interest in IP based video surveillance and IoT systems Self-motivation and flexibility Fluent English speaking and writing skills Lena Baßler Human Resources Telefon +49 6302 9816-115
The professional possesses in depth knowledge of the critical stages of semiconductor manufacturing, with a strong focus on wafer test and chip assembly, and maintains a high level understanding of adjacent process stages, including front end wafer fabrication and final test.Degree in Computer Science, Software Engineering, Electrical Engineering or comparable technical fieldStrong IT / software background with understanding of software architecture, data models and interfaces, system integration, industrial software solutions ideally with a background in manufacturing IT or MES environmentsExperience in semiconductor manufacturing, preferably in Wafer Test / Wafer Sort, Assembly, Final TestSolid knowledge of semiconductor data formats and standards such as SEMI E142, SECS/GEM (E5), E183, G85, STDFAbility to analyze complex technical data flows and translate them into software requirementsExperience working at the interface between customers, engineers and software development teamsStrong analytical and structured communication skillsFluent English required, German skills are a plus Gesundheitsmaßnahmen Mitarbeiterrabatte Aus- und Weiterbildung Betriebliche Altersvorsorge Mitarbeiterevents Unbefristete Arbeitsverträge Workation Flache Hierarchien und kurze Kommunikationswege 30 Tage Urlaub sowie anlassbezogener Sonderurlaub Reduzierte Vollzeit In der znt Zentren für Neue Technologien GmbH in Deutschland sowie in Österreich liegen unsere Vollzeitverträge unter 40 Stunden pro Woche.
The Oberalp Group is a management driven family business - a house of brands that creates high quality technical mountaineering products. We have 6 own brands Salewa, Dynafit, Pomoca, Wild Country, Evolv and LaMunt. As an exclusive partner of other brands in the sports sector we offer our entire know how in communication, sales and image building.
The Oberalp Group is a management driven family business - a house of brands that creates high quality technical mountaineering products. We have 6 own brands Salewa, Dynafit, Pomoca, Wild Country, Evolv and LaMunt. As an exclusive partner of other brands in the sports sector we offer our entire know how in communication, sales and image building.
The Oberalp Group is a management driven family business - a house of brands that creates high quality technical mountaineering products. We have 6 own brands Salewa, Dynafit, Pomoca, Wild Country, Evolv and LaMunt. As an exclusive partner of other brands in the sports sector we offer our entire know how in communication, sales and image building.