Das komplette Technologie-, Produkt- und Leistungsportfolio des Unternehmens umfasst ganzheitliche Lösungen für Elektronik, Automatisierung und Umwelttechnik und deckt alle Schritte der Wertschöpfungskette in der Eisen- und Stahlproduktion vom Rohstoff bis zum fertigen Produkt ab sowie modernste Walzwerkslösungen für NE-Metalle. Ihre neue Herausforderung Serve as the primary technical and technical-sales contact for converterrelated services (inspection, modernization, process audits, lifecycle management)Conduct independent customer visits worldwide, presenting Primetals Technologies solutions and identifying new business opportunitiesPerform on-site services, including mechanical inspections, condition assessments, and converter fitness checksPrepare and coordinate technical offers for spare parts, inspections, and modernization projectsAnalyze inspection results and prepare professional technical reportsTranslate customer requirements into technical solutions and service conceptsSupport modernization and upgrade planning, including spare parts and maintenance strategiesCooperate closely with internal departments (engineering, sales, purchasing)Execute supplier inspections and provide technical supervision during installation and commissioningPrepare and deliver presentations and training sessions for internal teams and customersContribute to knowledge sharing and development within the converter services network Ihre Kompetenzen ompleted higher technical education (HTL/FH/University) in mechanical engineering, mechatronics, or related fieldSeveral years of practical experience in converter operation, maintenance, or mechanical design — ideally from a steel plant environmentProven hands-on experience and readiness to perform on-site work (inspection, measurement, supervision, commissioning)Strong interest or proven experience in technical sales and customer relationsGood understanding of mechanical, hydraulic, and pneumatic systemsBasic knowledge of converter process and metallurgical principles advantageousKnowledge of AutoCAD, NX (Unigraphics), technical drawingsConfident use of MS OfficeVery good English skills, written and spokenHigh willingness to travel internationally (approx. 20–30%)Proactive, communicative, and solution-oriented personality Unser Angebot / Ihre Benefits Zusätzliche Information (nicht verwendet) https://bewerbungen.vace.at/job/15381?
YOUR TASKS: In this role, you will become a technical reference in assessing and solving structural challenges within our wind turbine fleet. Performing structural verifications for concrete and steel structures within tower development projects Collaborating with internal and external experts and suppliers, acting as a technical partner to drive robust engineering solutions.
Independent design of control and protection systems for high-voltage direct current (HVDC) transmission systemsImplementation of control software in MATLAB/SIMULINK and verification using simulation tools and real-time test environmentsPreparation of related design specifications, documentation, and effort estimationsClarification of technical requirements within project teams as well as with customers and suppliersRemote support during commissioning and in service cases Completed university degree in Electrical Engineering with a focus on power engineering or control engineering, along with relevant professional experienceStrong knowledge of converter and high-voltage technology, as well as plant, control, and automation engineeringSolid MATLAB/SIMULINK skills, including model-based implementation and verificationExperience in engineering automation systems, preferably SIMATIC TDC / S7Very good command of EnglishGerman language skills desirable You benefit from exclusive access to interesting companies and exciting projects in cooperation with Hays as a solid and stable partnerRemuneration in accordance with the industry collective agreement (GVP)Annual vacation entitlement of 30 daysWorking time account with the option of overtime pay or time off in lieuProfessional and trusting cooperation Ihr Kontakt Referenznummer 860505/1 Kontakt aufnehmen Telefon:+ 49 621 1788-4297 E-Mail: positionen@hays.de Anstellungsart Anstellung bei der Hays Professional Solutions GmbH
Responsible for Windows Server systems administration and large-scale infrastructure operationsDesign, modernization and build-out of Microsoft server infrastructuresOperation and monitoring of Microsoft environments Development of automation scripts and tools using PowerShellContribution to development tasks in C++ and C#Maintenance, development and troubleshooting of SQL databasesPreparation of documentation describing experience, modernization concepts and technical approachesExecution of hands-on operational, engineering and development tasks within Windows Server and network components Proven experience in Microsoft Windows Server administrationStrong knowledge of network operations in Microsoft environmentsProficiency in PowerShell-based automationDevelopment experience in C++ and C#Solid SQL skills for infrastructure-related development tasksExperience designing and operating large Microsoft infrastructures Experience in operating system development.
We look forward to hearing from you. Manage and refine business and technical requirements in collaboration with stakeholdersCoordinate data integration activities with various source systemsDesign and model data structures within a Data Warehouse environment, with a strong focus on Data Vault methodologyDevelop and optimize data pipelines using SQL and PythonWork with tools like Databricks and dbt to build scalable data transformation workflowsEnsure data quality, consistency, and compliance, especially within banking-related use cases Experience in requirements managementExperience in coordination with source systemsExperience with data modeling in a Data Warehouse environment: Focus on Data VaultGood German and English language skillsDatabricks experience is nice to haveExperience with dbt (data build tool) is an advantageExperience with SQL (as a query language) and Python is an advantageBanking experience is an advantage Renowned clientRemote work Ihr Kontakt Ansprechpartner Florian Pracher Referenznummer 863466/1 Kontakt aufnehmen E-Mail: florian.pracher@hays.at Anstellungsart Freiberuflich für ein Projekt
Definition of program scope, objectives, and success criteriaDevelopment of detailed project and test plans including timelines, milestones, and resourcesTime and capacity planning for all test participantsProgress, risk, and dependency management including on-track monitoringCoordination and participation in CFT meetings and cross-team prioritization sessionsIdentification of required departments and resources (Chemistry, Mechanical Engineering, Systems Engineering, etc.)Planning and coordination of hardware testsEnsuring timely availability of materials, equipment, and internal resourcesContinuous communication with all stakeholders and clarification of technical open pointsPreparation of test summaries, status reports, and management presentationsPreparation for and support during program reviews Technical background (Mechanical Engineering or Systems Engineering)Experience in project management and test coordinationVery good English skills (documents & meetings predominantly in English) – mandatoryExperience working in cross-functional environmentsHigh level of proactivity, structured working style, and strong communication skillsExperience in hardware test environments related to process engineering or chemical plant systemsUnderstanding of test materials and lab logisticsProficiency in MS Office required Support throughout the entire application process Ihr Kontakt Ansprechpartner Patrick Thomas Marolt Referenznummer 863776/1 Kontakt aufnehmen E-Mail: patrick.marolt@hays.at Anstellungsart Freiberuflich für ein Projekt
Ensure structured, transparent, and methodical execution of complex, cross-functional development projectsEnable teams and leadership to make fact-based decisions, safeguards adherence to governance and processes, drives cross-functional alignment, and continuously improves execution performance across the organization Bachelor in Computer Science, Software Engineering, Electrical Engineering, Information Technology, or a related technical fieldSolid understanding of business–economic correlations, cost structures, and scenario evaluationExtensive experience driving structured execution of complex, cross-functional development projects, ensuring transparency, alignment, and methodical governanceExperience coordinating or leading interdisciplinary technical development projects (mechatronic, embedded, system-level or cross-functionalStrong proficiency with project management tools (e.g.
YOUR TASKS: In this role, you will become a technical reference in assessing and solving structural challenges within our wind turbine fleet. Performing structural verifications for concrete and steel structures within tower development projects Collaborating with internal and external experts and suppliers, acting as a technical partner to drive robust engineering solutions.
The Oberalp Group is a management driven family business - a house of brands that creates high quality technical mountaineering products. We have 6 own brands Salewa, Dynafit, Pomoca, Wild Country, Evolv and LaMunt. As an exclusive partner of other brands in the sports sector we offer our entire know how in communication, sales and image building.
Labore, Forschungseinrichtungen, Industrie, Pharmazie, Bildungseinrichtungen) Akquisition von Neukunden Identifikation neuer Marktpotenziale und Zielkunden Aufbau und Entwicklung neuer Vertriebspartner Entwicklung und Umsetzung regionaler Vertriebsstrategien Markt- und Wettbewerbsanalyse Führen von Vertrags- und Preisverhandlungen Begleitung komplexer Projektgeschäfte Enge Zusammenarbeit mit Innendienst, Projektmanagement, Konstruktion/Technik, Service Reporting an den Technical Managing Director Abgeschlossene kaufmännische Ausbildung und sehr hohe technische Affinität oder vice versa Fundierte Erfahrung im mehrstufigen Vertrieb erklärungsbedürftiger technischer Produkte (z.
We look forward to hearing from you. Manage and refine business and technical requirements in collaboration with stakeholders Coordinate data integration activities with various source systems Design and model data structures within a Data Warehouse environment, with a strong focus on Data Vault methodology Develop and optimize data pipelines using SQL and Python Work with tools like Databricks and dbt to build scalable data transformation workflows Ensure data quality, consistency, and compliance, especially within banking-related use cases Experience in requirements management Experience in coordination with source systems Experience with data modeling in a Data Warehouse environment: Focus on Data Vault Good German and English language skills Databricks experience is nice to have Experience with dbt (data build tool) is an advantage Experience with SQL (as a query language) and Python is an advantage Banking experience is an advantage Renowned client Remote work Ihr Kontakt Ansprechpartner Florian Pracher Referenznummer 863466/1 Kontakt aufnehmen E-Mail: florian.pracher@hays.at Anstellungsart Freiberuflich für ein Projekt
Planning and coordination of hardware tests Ensuring timely availability of materials, equipment, and internal resources Continuous communication with all stakeholders and clarification of technical open points Preparation of test summaries, status reports, and management presentations Preparation for and support during program reviews Technical background (Mechanical Engineering or Systems Engineering) Experience in project management and test coordination Very good English skills (documents & meetings predominantly in English) – mandatory Experience working in cross-functional environments High level of proactivity, structured working style, and strong communication skills Experience in hardware test environments related to process engineering or chemical plant systems Understanding of test materials and lab logistics Proficiency in MS Office required Support throughout the entire application process Ihr Kontakt Ansprechpartner Patrick Thomas Marolt Referenznummer 863776/1 Kontakt aufnehmen E-Mail: patrick.marolt@hays.at Anstellungsart Freiberuflich für ein Projekt
Strong support for all launch activities On site analysis for electrical failures and software failures Perform joint pre-analysis and pre-rejection of parts at customer locations and support activities to reduce part returns and related costs Coordinate the transfer of return parts from related customer location(s)/warranty center(s) to the appropriate production location and, if applicable, register complained parts in the related system Propose and implement containment actions and corrective measures, trace affected products, notify impacted customers, analyze lessons learned and preventive actions Coordinate and control sorting, rework and reflash actions - where necessary with support from third-party service providers - in alignment with the customer and the involved Business Units to minimize production disruptions and reduce costs Manage and coordinate if applicable to a Customer Service Engineer Team across multiple customer locations within an assigned region Support product changes, customer plant trial runs, and safe launch activities at customer facilities Perform and coordinate reflash activities at customer plant Quality-Project-Experience Experience in Customer Relationship Management Language: German and Englisch required, Portuguese an advantage Experienced in SW and electrical analysis tools (CANoe, OBD tools etc.) Product and Application Knowledge Technical Problem Solving Long project duration possible Ihr Kontakt Ansprechpartner Julia Lang Referenznummer 860075/1 Kontakt aufnehmen E-Mail: julia.lang@hays.de Anstellungsart Freiberuflich für ein Projekt
The Oberalp Group is a management driven family business - a house of brands that creates high quality technical mountaineering products. We have 6 own brands Salewa, Dynafit, Pomoca, Wild Country, Evolv and LaMunt. As an exclusive partner of other brands in the sports sector we offer our entire know how in communication, sales and image building.
Wollen Sie mit uns erfolgreich sein? Dann senden Sie uns Ihre Bewerbung zu: SCHOTT Technical Glass Solutions GmbH, Human Resources, Eva Lemke *Bei SCHOTT zählt Ihre Persönlichkeit – nicht Geschlecht, Identität oder Herkunft.Ihr Profil Sie verfügen über eine kaufmännische Ausbildung, idealerweise ergänzt durch eine Zusatzqualifikation im Bereich Außenwirtschaft.Sie bringen mehrere Jahre Berufserfahrung im Vertrieb oder in der Logistik mit und kennen die Anforderungen eines dynamischen Kundenumfelds.Sie bewegen sich routiniert im SAP-System und in den MS Office Anwendungen und kommunizieren sicher auf Englisch in Wort und Schrift.Sie arbeiten serviceorientiert, zuverlässig und strukturiert und behalten auch bei hoher Auftragsdynamik den Überblick.Sie schätzen die Zusammenarbeit im Team, kommunizieren klar und verbindlich und treten professionell gegenüber internen und externen Ansprechpartnern auf.
Design and implement a SQL-based landing zone for regulatory dataDevelop stored procedures for transformation, enrichment, and aggregationBuild and operate high-volume batch processing chains for monthly/quarterly cyclesImplement SSIS-based ingestion flows and job orchestrationEnsure data quality, technical lineage, and full traceability across layersDefine and document integration patterns and mapping logic between landing-zone datasets and Tagetik-based reporting templatesPerform operational monitoring, troubleshooting, and performance optimization Strong expertise in Microsoft SQL Server and T-SQLHands-on experience with stored-procedure-driven ETL and complex data modelsSolid SSIS skills for orchestration and control of processing chainsExperience with batch processing, logging, restartability, and performance tuningKnowledge of data lineage, reconciliation, and regulatory processing needsExperience with reporting platforms such as Tagetik is a plusFamiliarity with Oracle source systems is advantageous Renowned ClientRemote Option Ihr Kontakt Ansprechpartner Eliška Stejskalová Referenznummer 862801/1 Kontakt aufnehmen E-Mail: eliska.stejskalova@hays.at Anstellungsart Freiberuflich für ein Projekt
Execute system integration testing within the IFX environment (Camstar / Opcenter)Support User Acceptance Testing (UAT) in alignment with business and functional requirementsParticipate in the factory integration rollout based on Infineon’s SOPs and standardsProvide post-stabilization support, including incident and problem management to reduce business impactHandle incident tickets according to SLA priorities (Critical / High / Medium / Low)Support root cause analysis and technical investigations during incidentsPrepare weekly status reports for the SAP Manufacturing System project teamCreate and document test cases, test reports, and UAT documentation Strong hands-on experience with Infineon productsProven practical experience with Camstar / Opcenter Solid knowledge in system testing, integration testing, and UAT preparationExperience with incident & problem management, including RCA methodologiesStrong understanding of business flows, functional specs, and manufacturing processesExcellent analytical and documentation skillsFluent English communication skills (international project environment) You will work in an international environmentA very renowned companyInteresting tasks in a multinational environment Ihr Kontakt Referenznummer 863788/1 Kontakt aufnehmen Telefon:+ 49 621 1788-4297 E-Mail: positionen@hays.de Anstellungsart Freiberuflich für ein Projekt
Register now and look forward to many interesting and suitable positions and projects. Technical and administrative support of the global PLM system landscape with a focus on Siemens Teamcenter and SAP S/4HANAFurther development and international rollout of CAD/PLM solutions (NX, Teamcenter) as part of the global digitalization strategyExecution of data migrations from legacy systems into new system environments as well as support during product phase-outsEnsuring smooth system integration between Teamcenter, SAP S/4HANA, and connected CAD systemsProfessional consulting and technical support for the specialist departmentsInteraction with internal and external partners for the operational implementation of global rollout projectsCreation of technical documentation, execution of tests, and training of end usersClear hands-on role – no architectural or strategic steering responsibilities Extensive experience in the administration of Siemens Teamcenter and SAP S/4HANA (hands-on focus – not an architectural or steering profile)Strong proficiency in working with CAD systems, particularly Siemens NXExperience with global PLM rollouts, system migrations, and the decommissioning of legacy systemsSolid understanding of complex integration scenarios between PLM, CAD, and ERP systemsExcellent German and English skills, both written and spokenWillingness to travel: assignments in Hungary (3–4 weeks) and the UK (2–3 weeks)Preferred: experience in an industrial environment (manufacturing industry / mechanical engineering) Partnership: comprehensive 360 degree support throughout the entire cooperation Ihr Kontakt Ansprechpartner Patrick Thomas Marolt Referenznummer 864753/1 Kontakt aufnehmen E-Mail: patrick.marolt@hays.at Anstellungsart Freiberuflich für ein Projekt
Design and implement a SQL-based landing zone for regulatory data Develop stored procedures for transformation, enrichment, and aggregation Build and operate high-volume batch processing chains for monthly/quarterly cycles Implement SSIS-based ingestion flows and job orchestration Ensure data quality, technical lineage, and full traceability across layers Define and document integration patterns and mapping logic between landing-zone datasets and Tagetik-based reporting templates Perform operational monitoring, troubleshooting, and performance optimization Strong expertise in Microsoft SQL Server and T-SQL Hands-on experience with stored-procedure-driven ETL and complex data models Solid SSIS skills for orchestration and control of processing chains Experience with batch processing, logging, restartability, and performance tuning Knowledge of data lineage, reconciliation, and regulatory processing needs Experience with reporting platforms such as Tagetik is a plus Familiarity with Oracle source systems is advantageous Renowned Client Remote Option Ihr Kontakt Ansprechpartner Eliška Stejskalová Referenznummer 862801/1 Kontakt aufnehmen E-Mail: eliska.stejskalova@hays.at Anstellungsart Freiberuflich für ein Projekt
Ensure structured, transparent, and methodical execution of complex, cross-functional development projects Enable teams and leadership to make fact-based decisions, safeguards adherence to governance and processes, drives cross-functional alignment, and continuously improves execution performance across the organization Bachelor in Computer Science, Software Engineering, Electrical Engineering, Information Technology, or a related technical field Solid understanding of business–economic correlations, cost structures, and scenario evaluation Extensive experience driving structured execution of complex, cross-functional development projects, ensuring transparency, alignment, and methodical governance Experience coordinating or leading interdisciplinary technical development projects (mechatronic, embedded, system-level or cross-functional Strong proficiency with project management tools (e.g.
You support technical enquiries from partners and suppliers (e.g. Greenflux, hardware manufacturers), clarify interface topics and ensure the exchange of technical informationYou advise on standard products and installation topics based on technical documentation and support installers as well as external partners with technical questionsYou also advise on technical requirements for AC chargers, support installation and configuration activities, and conduct standard technical trainings for internal teams and external stakeholders What makes you stand out You have completed vocational training in electrical engineering (e.g.
Job description / Your role: Take full ownership for the mechanical and thermal design of LEOspace products Supervise and coordinate all related engineering activities, including mechanical design, structural analysis, thermal design, and thermal analysis Lead and support the mechanical and thermal testing and qualification of space hardware Prepare comprehensive technical documentation, including design descriptions, development schedules, and test definitions Conduct preliminary assessments of mechanical and thermal robustness within an agile development framework Support system-level testing and qualification processes Contribute to our Simultaneous Engineering approach by collaborating with industrial process engineering teams to scale the production of mechanical and thermal systems Qualification Checklist: University degree (or equivalent) in engineering, aerospace, or a related technical field Experience in the space industry, with a focus on mechanical and thermal system design Demonstrated expertise in mechanical and/or thermal analysis, with knowledge of industry best practices Familiarity with material and process selection for space applications Strong teamwork and collaboration skills Fluency in English (written and spoken) Bonus Qualifications: Strong conceptual thinking and problem-solving skills Practical experience with numerical engineering tools for mechanical and thermal analysis in space systems Initial experience in leadership or project coordination roles Benefits: Join an innovative space-tech start-up with real impact on strategy and growth Collaborate globally and work hands-on with cutting-edge research and technology Enjoy a flexible, agile work environment with 30 days of vacation and remote work options Access top industry events, continuous learning, and professional development Benefit from relocation assistance to support your move, if required Ihr Ansprechpartner Dr.
Monitor Regulatory Landscape and Business Impact Continuously monitor and assess legislative and regulatory developments and evaluate their impact and opportunities for CHEPLAPHARM. Lead, Develop and Empower the Team Provide strong technical leadership, foster professional development and ensure continuous growth and engagement of your team. Manage External Service Providers Effectively manage external service providers acting on behalf of CHEPLAPHARM, ensuring quality, compliance and performance.
Register now and look forward to many interesting and suitable positions and projects. Technical and administrative support of the global PLM system landscape with a focus on Siemens Teamcenter and SAP S/4HANA Further development and international rollout of CAD/PLM solutions (NX, Teamcenter) as part of the global digitalization strategy Execution of data migrations from legacy systems into new system environments as well as support during product phase-outs Ensuring smooth system integration between Teamcenter, SAP S/4HANA, and connected CAD systems Professional consulting and technical support for the specialist departments Interaction with internal and external partners for the operational implementation of global rollout projects Creation of technical documentation, execution of tests, and training of end users Clear hands-on role – no architectural or strategic steering responsibilities Extensive experience in the administration of Siemens Teamcenter and SAP S/4HANA (hands-on focus – not an architectural or steering profile) Strong proficiency in working with CAD systems, particularly Siemens NX Experience with global PLM rollouts, system migrations, and the decommissioning of legacy systems Solid understanding of complex integration scenarios between PLM, CAD, and ERP systems Excellent German and English skills, both written and spoken Willingness to travel: assignments in Hungary (3–4 weeks) and the UK (2–3 weeks) Preferred: experience in an industrial environment (manufacturing industry / mechanical engineering) Partnership: comprehensive 360 degree support throughout the entire cooperation Ihr Kontakt Ansprechpartner Patrick Thomas Marolt Referenznummer 864753/1 Kontakt aufnehmen E-Mail: patrick.marolt@hays.at Anstellungsart Freiberuflich für ein Projekt
Im Raum Bayern suchen wir ab sofort für das Facilitymanagement unserer Standorte einen engagierten Technical Manager (m/w/d) in Vollzeit . Deine neuen Herausforderungen Hauptansprechpartner (m/w/d) für unsere Auftraggeber, Kunden und Mietpartner in allen Fragen rund um das technische und infrastrukturelle Facility Management für mehrere Standorte Steuerung und Kontrolle der eingesetzten Dienstleister Planung und verantwortliche Durchführung von Investitions-, Instandhaltungs- und Umbaumaßnahmen Angebotseinholung und Auftragsvergabe an Dienstleister und Fachunternehmen Abnahme und Abrechnung der Leistungen mit Gewährleistungsverfolgung Einleitung, Durchführung und Überwachung von qualitätssichernden Maßnahmen und Standards Kosten-/Nutzenanalyse von Facility-Management-Themen sowie Erarbeitung von Optimierungsvorschlägen und Benchmarks Das zeichnet Dich aus Fundierte technisch/bautechnische Ausbildung und Fachkenntnisse in Gewerken der Gebäudeausstattung Mehrjährige Berufserfahrung im beschriebenen Aufgabenbereich Besitz einer gültigen PKW-Fahrerlaubnis und regionale Reisebereitschaft Selbständige Arbeitsweise Durchsetzungsvermögen, Verhandlungsgeschick, Ergebnisorientierung und soziale Kompetenz Unser Angebot Gestaltungsspielraum: Wir suchen authentische Persönlichkeiten, die Lust haben, Ihre Persönlichkeit in unseren sympathischen Teams frei zu entfalten.
The Oberalp Group is a management driven family business - a house of brands that creates high quality technical mountaineering products. We have 6 own brands Salewa, Dynafit, Pomoca, Wild Country, Evolv and LaMunt. As an exclusive partner of other brands in the sports sector we offer our entire know how in communication, sales and image building.
Execute system integration testing within the IFX environment (Camstar / Opcenter) Support User Acceptance Testing (UAT) in alignment with business and functional requirements Participate in the factory integration rollout based on Infineon’s SOPs and standards Provide post-stabilization support, including incident and problem management to reduce business impact Handle incident tickets according to SLA priorities (Critical / High / Medium / Low) Support root cause analysis and technical investigations during incidents Prepare weekly status reports for the SAP Manufacturing System project team Create and document test cases, test reports, and UAT documentation Strong hands-on experience with Infineon products Proven practical experience with Camstar / Opcenter Solid knowledge in system testing, integration testing, and UAT preparation Experience with incident & problem management, including RCA methodologies Strong understanding of business flows, functional specs, and manufacturing processes Excellent analytical and documentation skills Fluent English communication skills (international project environment) You will work in an international environment A very renowned company Interesting tasks in a multinational environment Ihr Kontakt Referenznummer 863788/1 Kontakt aufnehmen Telefon:+ 49 621 1788-4297 E-Mail: positionen@hays.de Anstellungsart Freiberuflich für ein Projekt
You develop concepts and participate in feasibility studies to meet technical requirements You perform and take ownership of specific software development tasks, ensuring reviews using checklists and templates You lead work package definition, estimation, and planning, and enhance or document SW unit specifications and designs You review designs and contribute to the SW architecture, defining quality attributes and staying updated with technology trends You conduct root-cause analysis of complex issues and provide bug fixes for post-market software releases You ensure compliance with processes, propose improvements, and stay informed about regulatory and market standards Education in a software related field such as software or electrical engineering Industry experience Proven experience as a Software Engineer with a strong focus on Rust development Solid understanding of Rust's core concepts, including ownership, borrowing, and lifetimes Experience with asynchronous programming in Rust (e.g., using async/await) Familiarity with common Rust libraries and frameworks (e.g., tokio, actix-web, rocket, serde, sqlx) Experience with Linux and Dockers Internal career opportunities World renowned pharmaceutical company International and diverse environment Ihr Kontakt Referenznummer 865359/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
The Oberalp Group is a management driven family business - a house of brands that creates high quality technical mountaineering products. We have 6 own brands Salewa, Dynafit, Pomoca, Wild Country, Evolv and LaMunt. As an exclusive partner of other brands in the sports sector we offer our entire know how in communication, sales and image building.
Ihre Aufgaben Fachliche und disziplinarische Leitung der Abteilung Technical Customer Support als Teil der Qualitätsabteilung inklusive Führung eines interdisziplinären Expertenteams.Gesamtverantwortung für das GMP‑konforme Reklamationsmanagement: fristgerechte Bearbeitung, fundierte Ursachenanalysen, Ableitung, Umsetzung und Wirksamkeitsprüfung nachhaltiger CAPA‑Massnahmen.Sicherstellung einer konsistenten, qualitätsrelevanten Kommunikation mit Kunden, internen Stakeholdern und externen Partnern im Rahmen von Reklamationen, und Audits.Analyse qualitativer Kundenbeanstandungen und Bewertung von Risiken und Auswirkungen auf Produktqualität, Patientensicherheit und Compliance in enger Zusammenarbeit mit Entwicklung, Produktion, Qualität, Logistik und Customer Service, unter Berücksichtigung technischer, regulatorischer und organisatorischer Aspekte.Vorbereitung, Durchführung und Nachbereitung von Kundenaudits, inklusive Erstellung und Nachverfolgung von CAPA‑Plänen sowie Folgekommunikation mit dem Kunden.Organisation und Begleitung qualitätsbezogener technischer Kundenbesuche, inklusive Präsentation des Standorts, der Prozesse und des Qualitätsmanagementsystems.
Gathering, analyzing, structuring, and prioritizing business requirements for a new ERP and Master Data platformTranslating business needs into technical use cases, epics, features, and user storiesCollaborating with business stakeholders, IT architects, and development teamsEnsuring alignment between business processes, functional design, and technical implementationConducting workshops, requirement sessions, and cross-functional discussionsContributing to the stability, quality, and long-term scalabilitySupporting collaboration with external partners as well as nearshore/onshore delivery teamsBringing structure and clarity to complex business and technical topics Experience as a Business Analyst in complex IT programsCommunicating fluently in German and English (C1, business fluent)Understanding and experience with ERP processes in a retail context is a must haveApplying professional business analysis methodologies (requirements engineering, process modelling, use cases)Translating business requirements into technical conceptsCollaborating effectively with developers, architects, and product ownersWorking confidently in agile setups (SAFe, Scrum, hybrid models)Experience in international corporate environments and with enterprise level projectsExperience in large transformation programs or ERP greenfield implementations is an advantageKnowledge around Master Data Management, platform architectures, or integration architectures is an advantage International clientPartly remote Ihr Kontakt Ansprechpartner Florian Pracher Referenznummer 862239/1 Kontakt aufnehmen E-Mail: florian.pracher@hays.at Anstellungsart Freiberuflich für ein Projekt
Ensure reliable and stable interaction between embedded software, electronics, mechanics, and firmwareDevelop intelligent, system-level test concepts to verify overall instrument functionalityAnalyze logs and system data and translate findings into corrective actions or improvementsTake full ownership of issues throughout their lifecycle – from initial detection to final resolutionCollaborate closely with cross-functional development teams and production during complex troubleshooting phasesDeliver validated, high-quality work packages to global Service and Operations teams Bachelor’s or Master’s degree in Electrical Engineering, Mechanical Engineering, or Software EngineeringHands-on testing experience at the intersection of hardware and softwareStrong Linux expertise and proven experience in test automationAnalytical, systematic and curious mindset with the ability to understand complex system interactionsExperience in cross-functional collaboration and structured troubleshootingFluent English skills; German is an advantage Opportunity to work in a modern, agile R&D environment with high technical impactDirect contribution to the improvement and reliability of complex diagnostic instrumentsCollaboration with experienced engineering and development teams in an international setting Ihr Kontakt Referenznummer 862979/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
Familiarity with the constraints of physical product development (tooling, BOM, lead times) compared to pure software CyclesGood negotiation skills to protect the team's focusExceptional ability to bridge the gap between technical engineering teams and non-technical stakeholders or clientsMethodology: Knowledge of Agile frameworks (SAFe/Scrum/Kanban) and their application in regulated hardware environmentsFamiliar with Azure DevOps / SAP / Google toolsLanguages: Fluency in English and German (written and spoken) is required.
You develop concepts and participate in feasibility studies to meet technical requirementsYou perform and take ownership of specific software development tasks, ensuring reviews using checklists and templatesYou lead work package definition, estimation, and planning, and enhance or document SW unit specifications and designsYou review designs and contribute to the SW architecture, defining quality attributes and staying updated with technology trendsYou conduct root-cause analysis of complex issues and provide bug fixes for post-market software releasesYou ensure compliance with processes, propose improvements, and stay informed about regulatory and market standards Education in a software related field such as software or electrical engineering Industry experienceProven experience as a Software Engineer with a strong focus on Rust developmentSolid understanding of Rust's core concepts, including ownership, borrowing, and lifetimesExperience with asynchronous programming in Rust (e.g., using async/await)Familiarity with common Rust libraries and frameworks (e.g., tokio, actix-web, rocket, serde, sqlx) Experience with Linux and Dockers Internal career opportunities World renowned pharmaceutical companyInternational and diverse environment Ihr Kontakt Referenznummer 865359/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
Ensure reliable and stable interaction between embedded software, electronics, mechanics, and firmware Develop intelligent, system-level test concepts to verify overall instrument functionality Analyze logs and system data and translate findings into corrective actions or improvements Take full ownership of issues throughout their lifecycle – from initial detection to final resolution Collaborate closely with cross-functional development teams and production during complex troubleshooting phases Deliver validated, high-quality work packages to global Service and Operations teams Bachelor’s or Master’s degree in Electrical Engineering, Mechanical Engineering, or Software Engineering Hands-on testing experience at the intersection of hardware and software Strong Linux expertise and proven experience in test automation Analytical, systematic and curious mindset with the ability to understand complex system interactions Experience in cross-functional collaboration and structured troubleshooting Fluent English skills; German is an advantage Opportunity to work in a modern, agile R&D environment with high technical impact Direct contribution to the improvement and reliability of complex diagnostic instruments Collaboration with experienced engineering and development teams in an international setting Ihr Kontakt Referenznummer 862979/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
Bachelor’s or Master’s degree in Engineering (Electrical, Mechanical) or a related technical field Experience/ Proven track record as a Product Owner or Project Lead in a hardware-centric environment, ideally within the MedTech or Healthcare industry Technical and Systems Engineering Expertise: Strong ability to define and estimate complex work packages in an engineering context.
What You’ll Do: Partner with business teams to understand workflows, challenges, and opportunitiesIdentify and prioritize AI use cases with measurable business impactTranslate business needs into AI-driven solutionsDeliver practical AI training sessions, workshops, and demosPromote safe and responsible AI adoptionHelp teams understand AI capabilities, limitations, and best practicesDesign scalable AI solutions using Agentic AI, LLMs, and Generative AI conceptsApply prompt engineering best practicesBuild solutions using low-code/no-code platforms (e.g., Power Automate, Power Apps, Copilot Studio, Cognigy)Collaborate with AI and technical teams to bring ideas to production What makes you stand out 3+ years in business consulting, product, or similar roles guiding AI/automation initiatives3+ years delivering AI or automation projects with measurable resultsStrong understanding of: Agentic AI, LLMs & Prompt Engineering, Generative AI, Hands-on experience with tools like: Cognigy, Copilot Studio and Power Automate / Power AppsSolid understanding of data fundamentals (PII, permissions, telemetry)Experience building simple impact dashboards in Power BIExperience designing and running workshops & training sessionsDegree in Business Informatics, Computer Science, or related field What Makes You Stand Out: Collaborative, solution-oriented mindsetAbility to translate complex AI topics into business languageIndependent, proactive way of workingPassion for implementing cutting-edge AI solutions We are looking forward to your application and to applicants who enrich our diverse culture!
Mulesoft Certified Developer) is a plus Strong understanding of system integration concepts, API management, and modern integration patterns Experience designing or supporting integration solutions using REST, SOAP, or event driven architectures Familiarity with API testing tools and automated testing practices (e.g., API test suites, CI/CD pipelines) Strong communication and collaboration skills, with the ability to work effectively across technical and non technical teams, managing dependencies, and ensuring transparent status reporting Languages: English (fluent), German (good knowledge) Possibilities to work in a home office A very renowned company Ihr Kontakt Ansprechpartner Olga Fester Referenznummer 864814/1 Kontakt aufnehmen E-Mail: olga.fester@hays.de Anstellungsart Freiberuflich für ein Projekt
The Oberalp Group is a management driven family business - a house of brands that creates high quality technical mountaineering products. We have 6 own brands Salewa, Dynafit, Pomoca, Wild Country, Evolv and LaMunt. As an exclusive partner of other brands in the sports sector we offer our entire know how in communication, sales and image building.
The Oberalp Group is a management driven family business - a house of brands that creates high quality technical mountaineering products. We have 6 own brands Salewa, Dynafit, Pomoca, Wild Country, Evolv and LaMunt. As an exclusive partner of other brands in the sports sector we offer our entire know how in communication, sales and image building.
The Oberalp Group is a management-driven family business—a house of brands that creates high-quality technical mountaineering products. We have six own brands—Salewa, Dynafit, Pomoca, Wild Country, Evolv, and LaMunt—and a team of more than 1,000 employees in 11 countries worldwide.
Working in an interdisciplinary team of engineers to develop and improve designs and manufacturing processes for thick film sensors Improve and maintain the data infrastructure and pipeline for production and process control data from various sources and ensure timely data availability Act as a technical interface between R&D and Production and between various R&D departments to harmonize data handling and standards Improve and maintain data visualization tools (dashboards, interactive charts) and support in routine data analysis Support in defining and improving image analysis methods and tools to derive quantitative feature values from images Extend the data infrastructure with additional information, e.g. from sensor performance characterization Data driven improvements of manufacturing processes Completed technical training in process engineering, data science, bioinformatics, or similar professional education Professional experience in industrial R&D or manufacturing environment, ideally in the medical device industry or a comparable regulated environment Experience in building and maintaining data pipelines (ETL processes) from diverse sources such as SQL databases, CSV, and machine log files Ability to create interactive dashboards and visualization tools with a solid understanding of applied statistics (e.g. correlation analysis, cluster analysis) to support the development teams Skills in digital image processing, object-oriented programming (OOP) in Python, and knowledge of SQL are a strong advantage, adding significant value to this opportunity Good communication skills in a multicultural and multidisciplinary environment A thorough way of working and documentation Motivated team player with passion in promoting and driving fast-paced and ambitious projects Aptitude to understand and improve the underlying technical processes Proficiency in both English and German Unlimited project contract Fascinating, innovative environment in an international atmosphere Ihr Kontakt Ansprechpartner Jannik Fabio Eichin Referenznummer 865639/1 Kontakt aufnehmen E-Mail: jannik.eichin@hays.ch Anstellungsart Freiberuflich für ein Projekt
IHR AUFGABENGEBIET Teamunterstützung bei der Entwicklung maßgeschneiderter Kundenlösungen Beteiligung an der Digitalisierung und Automatisierung von Prozessen in innovativen Projekten Konzeption technischer Systeme und Erfassung von Kundenanforderungen Entwicklung kundenspezifischer Lösungen mit einem Anteil von 20-30% der Arbeitszeit Unterstützung der Teams für Qualitätssicherung, Support und Entwicklung Dokumentation der Entwicklungsprozesse in Zusammenarbeit mit den Anwendungsberatern Enge Kooperation und direkter Ansprechpartner für Kundenbelange IHRE KENNTNISSE Umfassende Kenntnisse in Microsoft Dynamics NAV und 365 Business Central Versiert im Umgang mit Entwicklungstools für Dynamics NAV/BC, einschließlich NAV C/AL, C/SIDE und AL Tiefgreifendes Verständnis von Programmiersprachen wie C# und VB sowie Erfahrung mit Visual Studio Lösungsorientierte, kundenfreundliche und serviceorientierte Arbeitsweise Starke Kommunikationsfähigkeiten und soziale Kompetenz Selbstständige und verantwortungsbewusste Arbeitsweise Hochschulabschluss in Wirtschaftsinformatik/Betriebswirtschaft oder eine ähnliche Qualifikation Fließend in Deutsch und gute Englischkenntnisse IHRE ERFAHRUNGEN Mit Ihrer umfangreichen Erfahrung in der Entwicklung von Kundenlösungen und Applikationsentwicklung mit Dynamics NAV/BC sind Sie bestens gerüstet, um als Technical Consultant zu glänzen oder sich aus einer Developer-Rolle weiterzuentwickeln. Ihre Kenntnisse in der objektorientierten Umgebung und den Business Central Extensions ermöglichen es Ihnen, die technische Umsetzung von Kundenprojekten nicht nur zu bewerten, sondern auch aktiv zu gestalten und zu optimieren.
The Oberalp Group is a management driven family business - a house of brands that creates high quality technical mountaineering products. We have 6 own brands Salewa, Dynafit, Pomoca, Wild Country, Evolv and LaMunt. As an exclusive partner of other brands in the sports sector we offer our entire know how in communication, sales and image building.
The Oberalp Group is a management driven family business - a house of brands that creates high quality technical mountaineering products. We have 6 own brands Salewa, Dynafit, Pomoca, Wild Country, Evolv and LaMunt. As an exclusive partner of other brands in the sports sector we offer our entire know how in communication, sales and image building.
The Oberalp Group is a management-driven family business—a house of brands that creates high-quality technical mountaineering products. We have six own brands—Salewa, Dynafit, Pomoca, Wild Country, Evolv, and LaMunt—and a team of more than 1,000 employees in 11 countries worldwide.
Zur Verstärkung suchen wir Dich ab sofort in Vollzeit. Werde ein festes Teammitglied in unserem Team Technical Quality Control. In der Region Mittel-/ Ostdeutschland unterstützt du gemeinsam mit unserem Team die Technische Qualitätssicherung der Monteure, der Montagen und des Anlagenbestandes im Bereich der Erfassungsgeräte für Wasser und Wärme sowie der RWM.Qualitätssicherung vor Ort: Du überprüfst Installationen auf Einhaltung unserer Standards – vorwiegend in Mittel- und Ostdeutschland, mit regelmäßigen, teils mehrtägigen Dienstreisen.Messtechnische Kontrolle: Du führst Überprüfungen an allen messtechnischen Einrichtungen durch: Wasser- und Wärmezählern sowie Heizkostenverteilern.Monteursbegleitung & Schulung: Du begleitest Monteure bei Installationen, führst Qualitätskontrollen durch und gibst dein Wissen weiter.Anlagenbewertung & Vertriebsunterstützung: Du bewertest Heizungsanlagen und Heizräume und unterstützt unseren Außendienst bei der Übernahme komplexer Neuanlagen.Innovationen testen: Du testest neue Mess- und Funktechnologien und entwickelst gemeinsam mit dem Team Lösungen für komplexe Anlagen.Sonderfälle analysieren: Du untersuchst technische Mängel und entwickelst nachhaltige Lösungen.Technisches Know-how: Du hast einen erfolgreichen Abschluss als Installateur:in- und Heizungsbauermeister:in (m/w/d), Meister:in (m/w/d) Heizungs-, Lüftungs- und Sanitärtechnik, Messtechnik, Zentralheizungs- und Lüftungsbaumeister:in (m/w/d), SHK Meister:in (m/w/d) oder bringst mindestens vier Jahre einschlägige Berufserfahrung mit.Fachkenntnisse: Du kennst dich mit Wärme- und Wasserzählern sowie Rauchwarnmeldern aus – sowohl in der Anwendung als auch in der Montage.Starke Persönlichkeit: Du überzeugst durch Eigeninitiative und Durchsetzungsvermögen.
YOUR TASKS • Organize, conduct, and document safety briefings and site inspections on Nordex construction sites • Advise and support all stakeholders on construction sites in all HSE-related matters • Conduct incident investigations and define necessary corrective actions • Contribute to the development and implementation of HSE programs and further develop the HSE management system • Implement customer specific HSE requirements and ensure compliance • Review documents such as qualification matrices or RAMS • Process HSE tickets and provide clear follow up communication • Participate in meetings with customers, external service providers, and authorities YOUR PROFILE • Several years of experience as an Occupational Safety Specialist on construction sites or equivalent • Completed training in occupational safety or a technical profession is an advantage • Strong assertiveness, organizational skills, and a collaborative mindset • Very good English skills and good German skills (written and spoken) • Willingness to travel regularly to construction sites and wind farms across Germany • Physically fit and certified for working at heights • Valid class B driver’s license DEINE BENEFITS Nordex bietet eine Vielzahl an attraktiven Benefits – hier findest du einen Auszug dessen, was Dich bei uns erwartet.
We look forward to hearing from you. Develop and maintain software solutions by applying in-depth technical knowledge and problem-solving skills, while ensuring compliance with regulatory standards for medical softwareEnsure the timely delivery of high-quality software for medical devices that meets both the company's standards and customer needs, influencing the success of the team and broader project outcomesCommunicate complex technical concepts effectively, fostering an environment of collaboration and continuous learning within and across diverse and intercultural teamsEmpower your team members to take ownership of their work and leading by example to foster teamwork and mentorship Degree or equivalent practical experience in a specialized field related to software development or engineeringProven experience in software development, with a demonstrated passion and hands-on professional experience working with Rust incl. a solid understanding of Rust's core concepts (ownership, borrowing, and lifetimes), experience with asynchronous programming in Rust (e.g., using async/await) and familiarity with common Rust libraries and frameworks (e.g., tokio, actix-web, rocket, serde, sqlx).Capable of solving complex issues creatively and effectively, using a multi-faceted approach based on thorough analysis to resolve complex technical challengesExcellent communication skills with the ability to foster an inclusive and diverse environment as well as collaborate effectively within and across teamsEnglish fluency is a prerequisite, German is advantageous Internal career opportunitiesWorld-renowned medical devices company Ihr Kontakt Referenznummer 858105/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
Analyze system requirements and assess the feasibility of testing in simulated environments as well as in vehiclesDesign and develop test cases for system requirements, particularly for IVI systems including navigation, telematics, and streaming servicesExecute integrated system tests on test benches and in-vehicle environmentsTake ownership of key test milestones, such as quality audits and final release gate checks for new vehicle platformsCollaborate closely with Tier-1 suppliers and coordinate activities with our R&D headquarters in KoreaTrack issues and manage bug fixes using JIRA, ensuring alignment with vehicle line timelines and software release planReview and challenge technical solutions with a focus on system performance and market competitivenessIdentify improvement opportunities based on European market trends and actively support their implementation Bachelor’s or Master’s degree in Computer Science, Engineering, Electrical Engineering, or a related fieldPractical experience conducting driving tests within the EU region, ideally in the area of automotive infotainment validationExperience in system validation, preferably covering navigation, connected car services, and streaming applicationsFamiliarity with configuration management and version control toolsBasic knowledge of data analytics is an advantageStrong planning and organizational skills with a structured working approachHigh level of flexibility and motivation to work in an international and cross-cultural environmentVery good command of the English language, both written and spokenWillingness to travel and conduct driving tests; valid European driving license (Category B) required Pleasant working atmosphereChallenging and varied tasks in a promising and innovative industryDynamic and innovative market environmentA highly motivated team and an open communication styleAngenehmes Arbeitsklima Ihr Kontakt Ansprechpartner Annika Chrysant Referenznummer 858521/1 Kontakt aufnehmen E-Mail: annika.chrysant@hays.de Anstellungsart Anstellung bei der Hays Professional Solutions GmbH