Requirements: Graduate Software Engineer (or equivalent knowledge and skills acquired by other means)Experience in Software Development for at least 3 yearsGood English capabilities, both spoken and written, at least B2 (CEFR)High flexibility and adaptabilitySpecification of high level and low level software requirements (SRS, SDDD)Technical reviewsProgramming experience in C and/or Assembler Code What we offer: Future prospects in an innovative, growing, and agile companyAn exciting work environment with diverse career opportunitiesA tariff/above-tariff salaryFlexible working hours and the option for remote work30 vacation days per year and special leave for special occasions upon employment at Xtended EngineeringBonus programs for referrals and employee recruitmentTeam events Xtended Engineering GmbH bringt qualifizierte Ingenieure mit Unternehmen aus der Industrie und Wirtschaft zusammen.
Responsibilities: Design, develop and integrate avionics systems (ATA 22, 23, 31, 34, 45, 46, 77) on aircraft levelCreate concepts and specify requirements for the onboard maintenance system and electronic checklistsAssist in the definition of the Engine Indication and Crew Alerting System (EICAS) and synopticsReview and release Part 21 compliance documentation (MoC 0-9)Prepare specifications and other type design documentsBe the point of contact for external suppliers in technical mattersSupport qualification, ground and flight test activitiesPerform technical trade studiesxDevelop technical solutions to in-service problem Requirements: Master’s Degree or Diplomingenieur in Aerospace 10 years of experience in aerospace industry Experience of at least one new aircraft development programFamiliar with EASA Part 21J und CS-25/FAR 25 Very good English language skillsExcellent team spirit, communication and interpersonal skills Will to assume responsibility Capable of structuring and organizing work in efficient and effective manner Strong analytical skills, hands-on mentality Creativity and the ability to act independently Technical problem-solving and decision-making ability What we offer: Future prospects in an innovative, growing, and agile companyAn exciting work environment with diverse career opportunitiesA tariff/above-tariff salaryFlexible working hours and the option for remote work30 vacation days per year and special leave for special occasions upon employment at Xtended EngineeringBonus programs for referrals and employee recruitmentTeam events Xtended Engineering GmbH bringt qualifizierte Ingenieure mit Unternehmen aus der Industrie und Wirtschaft zusammen.
We are seeking for a talented Enterprise Architect – Tools and Monitoring to join our team. You are expected to deliver technical and architecture design and formulate standards related IT monitoring landscape (Infrastructure, Application and Business Process).
We provide our employees not only with performance-based compensation but also with long-term career prospects—from developing technical and social skills to advancing into leadership roles. This is achieved through tailored training programs and relevant projects that enable career progression, for example, from a project team member to a project manager.
Job description / Your role: Take full responsibility for the development of our cybertronic products, typically comprising one or more electric actuators, electronics, mechanical structures, software, and harnesses Supervise and coordinate all engineering activities required for product development, qualification, and industrial manufacturing Lead system engineering efforts for integrated mechanism products, ensuring performance and compliance across subsystems Define and manage system-level performance budgets (e.g. mass, power, thermal) Prepare comprehensive technical documentation, including design descriptions, development schedules, and test specifications Support product testing and qualification processes from prototype to flight-ready hardware Contribute to the Simultaneous Engineering process by collaborating with industrial process engineering teams to scale production Qualification Checklist: University degree (or equivalent) in engineering, aerospace, mechatronics, or a related technical field Professional experience in mechanism or actuator development Industry experience in the space sector, particularly with space mechanisms and electromechanical actuators Proficiency in working with technical requirements, including authoring, reviewing, and interpreting specifications Strong conceptual thinking and analytical problem-solving skills Ability to work effectively in multidisciplinary teams Fluency in English (written and spoken) Bonus Qualifications: Familiarity with numerical engineering tools used for structural, thermal, or motion analysis Initial experience in technical leadership or coordination roles Knowledge of material selection and manufacturing processes suitable for space applications Profound understanding of the full engineering workflow required to design, develop, and qualify space-grade actuators and electronics Extensive professional experience in mechanism or actuator development Benefits: Join an innovative space-tech start-up with real impact on strategy and growth Collaborate globally and work hands-on with cutting-edge research and technology Enjoy a flexible, agile work environment with 30 days of vacation and remote work options Access top industry events, continuous learning, and professional development Benefit from relocation assistance to support your move, if requiredBe part of a supportive team with room to grow as we scale together Ihr Ansprechpartner Dr.
This role offers the opportunity to gain practical experience in technical documentation, certification processes and industry-standard documentation tools. YOUR TASKS • You create, archive and maintain certificates and certification‑relevant documentation in database systems • You maintain structured certificate overviews and organize database or folder structures • You support engineering teams in procuring and preparing documentation required for certification • You prepare document overviews and reports to help meet certification deadlines • You generate Power BI reports based on obtained certificates and documentation status • You define or adapt system requirements and export certification‑related documents • You maintain and update documentation in tools such as Integrity, Windchill, Teamcenter and Safexpert YOUR PROFILE • You are enrolled as a student in a relevant field or equivalent study background • You have very good MS Office skills • You have excellent German skills and good English skills, both written and spoken • You work in a structured, autonomous and diligent way and enjoy team collaboration • You communicate clearly and effectively across interdisciplinary teams • You are interested in wind energy topics and technical documentation YOUR BENEFITS Nordex offers a range of attractive benefits – here’s a selection of what you can look forward to.
Your tasks: Select and qualify packaging suppliers to ensure high-quality materials and collaborate with them to choose optimal packaging solutions for pharmaceutical products Lead global harmonization projects to standardize packaging specifications and processes, coordinating closely with international stakeholders from Operations Units and Innovation & Development Establish solid supplier requirements and contract these in supplier quality agreements Conduct quality audits at packaging manufacturers to review processes, improvements, and innovations while ensuring compliance with quality standards and mitigating supply chain risks Support Operational Units in resolving quality issues related to packaging materials through expert risk assessment and corrective actions Foster effective communication and seamless information exchange across the global packaging network, sharing best practices with international experts Contribute to the supplier management program by developing and refining standard operating procedures for supplier management activities Your qualifications Academic background in (Packaging) Engineering, Material Science, or a related technical field, complemented by a minimum of 3 years of relevant industry experience in packaging-related development, production, or quality assurance within the pharmaceutical or medical device sectorExtensive expertise in packaging production technologies and understanding of associated packaging defects for selected categories such as glass, rubber stoppers, thermoplastics, foils, and printed packaging, mainly used for IV solutionsStrong background in assessing primary packaging interactions with products, supported by experience in extractables and leachables studiesCompetencies in quality auditing packaging material suppliers and in-depth knowledge of GxP standards for packaging (e.g., ISO 15378) and regulatory procedures across Europe, the US, and ChinaBusiness fluency in both English and German, plus proficiency with IT tools such as MS Office, SharePoint, and SAP We offer you: A permanent employment contract Competitive salary Flexible working hours and home office options Opportunities for professional development and training Great working atmosphere and a highly motivated team Show us what moves and motivates you - apply now and be part of our inspiring company culture!
• Conduct planned and ad hoc services to inspect, service, troubleshoot, and repair various technical systems. You will also diagnose any issues to prevent equipment downtime. • Ensure safety compliance, and document activities
The Oberalp Group is a management driven family business - a house of brands that creates high quality technical mountaineering products. We have 6 own brands Salewa, Dynafit, Pomoca, Wild Country, Evolv and LaMunt. As an exclusive partner of other brands in the sports sector we offer our entire know how in communication, sales and image building.
The Oberalp Group is a management driven family business - a house of brands that creates high quality technical mountaineering products. We have 6 own brands Salewa, Dynafit, Pomoca, Wild Country, Evolv and LaMunt. As an exclusive partner of other brands in the sports sector we offer our entire know how in communication, sales and image building.
Your Tasks Layout planning for individual machines, plant sections, complete systems, and turnkey plants in the beverage industry, considering: occupational safety aspects (noise, safety), ergonomic aspects (operability, accessibility), economic aspects (number of machine operators) and intralogistics aspects (supply and disposal of machines) Project presentations and customer consulting region of south Europe Assessment of current situations and building conditions in Germany and abroad Design of complex returnable glass bottle sorting systems Your Qualifications Preferably a combined technical and commercial university degree in the field of beverage technology, mechanical engineering, or a comparable qualification Professional experience in layout planning for machinery and plant engineering; ideally in the beverage industry Excellent technical understanding Resilient, reliable, and flexible working style characterized by strong creativity and results orientation Very good product and process knowledge Good MS Office and CAD skills Excellent English skills, both written and spoken Willingness to travel internationally Benefits Innovative and international working environment Challenging and diversified job Working in a highly motivated team Strong company group Attractive remuneration Social benefits Location: Wiener Neudorf ǀ Niederösterreich ǀ Österreich
Definition of program scope, objectives, and success criteriaDevelopment of detailed project and test plans including timelines, milestones, and resourcesTime and capacity planning for all test participantsProgress, risk, and dependency management including on-track monitoringCoordination and participation in CFT meetings and cross-team prioritization sessionsIdentification of required departments and resources (Chemistry, Mechanical Engineering, Systems Engineering, etc.)Planning and coordination of hardware testsEnsuring timely availability of materials, equipment, and internal resourcesContinuous communication with all stakeholders and clarification of technical open pointsPreparation of test summaries, status reports, and management presentationsPreparation for and support during program reviews Technical background (Mechanical Engineering or Systems Engineering)Experience in project management and test coordinationVery good English skills (documents & meetings predominantly in English) – mandatoryExperience working in cross-functional environmentsHigh level of proactivity, structured working style, and strong communication skillsExperience in hardware test environments related to process engineering or chemical plant systemsUnderstanding of test materials and lab logisticsProficiency in MS Office required Support throughout the entire application process Ihr Kontakt Ansprechpartner Patrick Thomas Marolt Referenznummer 863776/1 Kontakt aufnehmen E-Mail: patrick.marolt@hays.at Anstellungsart Freiberuflich für ein Projekt
Ensure structured, transparent, and methodical execution of complex, cross-functional development projectsEnable teams and leadership to make fact-based decisions, safeguards adherence to governance and processes, drives cross-functional alignment, and continuously improves execution performance across the organization Bachelor in Computer Science, Software Engineering, Electrical Engineering, Information Technology, or a related technical fieldSolid understanding of business–economic correlations, cost structures, and scenario evaluationExtensive experience driving structured execution of complex, cross-functional development projects, ensuring transparency, alignment, and methodical governanceExperience coordinating or leading interdisciplinary technical development projects (mechatronic, embedded, system-level or cross-functionalStrong proficiency with project management tools (e.g.
Your role As a Sales Engineer, your mission is to drive sales growth for our business by leveraging your technical expertise and understanding of customer needs. You will report to the Sales Manager and work closely with the engineering and product teams to ensure the successful implementation of sales strategies.
Your Tasks Layout planning for individual machines, plant sections, complete systems, and turnkey plants in the beverage industry, considering: occupational safety aspects (noise, safety), ergonomic aspects (operability, accessibility), economic aspects (number of machine operators) and intralogistics aspects (supply and disposal of machines) Project presentations and customer consulting region of south Europe Assessment of current situations and building conditions in Germany and abroad Design of complex returnable glass bottle sorting systems Your Qualifications Preferably a combined technical and commercial university degree in the field of beverage technology, mechanical engineering, or a comparable qualification Professional experience in layout planning for machinery and plant engineering; ideally in the beverage industry Excellent technical understanding Resilient, reliable, and flexible working style characterized by strong creativity and results orientation Very good product and process knowledge Good MS Office and CAD skills Excellent English skills, both written and spoken Willingness to travel internationally Benefits Innovative and international working environment Challenging and diversified job Working in a highly motivated team Strong company group Attractive remuneration Social benefits Location: Wiener Neudorf ǀ Niederösterreich ǀ Österreich
It is necessary for the employee to have certain basic skills and knowledge, as well as personal abilities and qualities that allow them to adapt to the functions and responsibilities of the area. Technical Skills: Mechanical, Electrical, Chemical, Mechatronics, Electronics, Automation, Industrial, or related fieldsExperience with B2B sales methodology and technical salesBasic engineering concepts (physics, mathematics, machines, and tools)Cold prospecting experienceKnowledge of Vacuum and Leak Detection (Preferred)Office suite proficiencyCRM usage (Preferred) Soft Skills: Effective communicationAttention to detailAbility to learn We Offer You: A diverse and inclusive workspaceA place where your ideas are welcome
Cross-Functional Team Management You manage internal, cross-functional proposal teams, bringing together technical and commercial expertise to create compelling offers. Negotiation and Support You take the lead in negotiations, driving them to a successful closure of contracts.
YOUR TASKS • Organize, conduct, and document safety briefings and site inspections on Nordex construction sites • Advise and support all stakeholders on construction sites in all HSE-related matters • Conduct incident investigations and define necessary corrective actions • Contribute to the development and implementation of HSE programs and further develop the HSE management system • Implement customer specific HSE requirements and ensure compliance • Review documents such as qualification matrices or RAMS • Process HSE tickets and provide clear follow up communication • Participate in meetings with customers, external service providers, and authorities YOUR PROFILE • Several years of experience as an Occupational Safety Specialist on construction sites or equivalent • Completed training in occupational safety or a technical profession is an advantage • Strong assertiveness, organizational skills, and a collaborative mindset • Very good English skills and good German skills (written and spoken) • Willingness to travel regularly to construction sites and wind farms across Germany • Physically fit and certified for working at heights • Valid class B driver’s license
Planning and coordination of hardware tests Ensuring timely availability of materials, equipment, and internal resources Continuous communication with all stakeholders and clarification of technical open points Preparation of test summaries, status reports, and management presentations Preparation for and support during program reviews Technical background (Mechanical Engineering or Systems Engineering) Experience in project management and test coordination Very good English skills (documents & meetings predominantly in English) – mandatory Experience working in cross-functional environments High level of proactivity, structured working style, and strong communication skills Experience in hardware test environments related to process engineering or chemical plant systems Understanding of test materials and lab logistics Proficiency in MS Office required Support throughout the entire application process Ihr Kontakt Ansprechpartner Patrick Thomas Marolt Referenznummer 863776/1 Kontakt aufnehmen E-Mail: patrick.marolt@hays.at Anstellungsart Freiberuflich für ein Projekt
Knowledge of German preferred At least 5 years hands-on experience in C&P systems for large industrial converter applications (ideally engineering / commissioning in HVDC or similar electrical converter systems) Experience in leading small engineering or commissioning teams is a plus You are flexible to work on-site for some weeks during acceptance tests You approach complex tasks with analytical skills and a structured way of thinking You are actively driving topics and resolving issues by means of stakeholder management You are comfortable in direct communication with customers and internal stakeholders Benefits Unlimited employment with individual training and development opportunities Exciting projects at a high technical level Flexible working hours including overtime compensation Strong teams with an open and friendly working atmosphere as well as flat hierarchies New and modern equipped office building Attractive company pension schemes A subsidized membership with Urban Sports Club Regular employee events (Summer party, Christmas party)
Shape the roadmap: Contribute to needs analysis, project planning, and controlling activities within our customer base. What you bring A degree in a technical field — or comparable professional experience; a background in mathematics is a strong plus. Hands-on experience with Python as your primary tech stack for AI and data-driven solutions.
Your assignments Leading multidisciplinary and multicultural teamsManagement of urban water projectsResponsibility for studies, design and tender documents for different investment measures in the field of urban water managementLiaison and communication with the Client and the Donor AgenciesManagement of technical deliverables and reportingDetermine and define project scope and objectivesPredict resources needed to reach objectives and manage resources in an effective and efficient mannerPrepare budget based on scope of work and resource requirementsTrack project costs to meet budgetDevelop and manage a detailed project schedule and work planProvide project updates on a consistent basis to various stakeholders about strategy, adjustments, and progressManage contracts with subcontractors and suppliers by assigning tasks and communicating expected deliverablesUtilize industry best practices, techniques, and standards throughout entire project executionMeasure project performance to identify areas for improvement Your profile University degree (M.Sc.) in civil engineer, mechanical engineer, process or environmental engineer or other suitable qualificationPreferably 15 years of professional experience in international consulting / engineering in the field of urban water managementSeveral years of experience in project management, project control (backstopping) and in dealing with international donor organizations and development banksConfirmed successful acquisition of consulting projectsVery good leadership, team development and communication skillsVisionary thinking skills and the ability to support and shape a developing department and teamWillingness to travel extensivelyFluently in English language (working proficiency), preferably in an additional business language (French, Spanish, etc.)Proficient with Project Management software preferredStrong interpersonal and technical writing skills.Preferably additional qualifications in project management (PMI or similar) We offer Employment on a permanent or freelance basisFlexible working environment (mobile office/office hours)Friendly and collaborative spirit in multidisciplinary teamsFinancial benefits (e.g. participation in corporate success)Office amenities (e.g. company sports, free water, coffee and tea) Please send your application to Christina Müller When applying for a job at GKW Consult, please note our information on data protection for applicants.
Customer Service Representative (w/m/d) For 30 years, Brunner´s Personnel Services has been successfully placing skilled professionals and managers in the Munich area. We also specialize in placing technical and engineering professionals. We are a member of the German Association of Personnel Service Providers (GVP). We are looking for a full-time employee for our client in Munich for direct placement.
Ensure structured, transparent, and methodical execution of complex, cross-functional development projects Enable teams and leadership to make fact-based decisions, safeguards adherence to governance and processes, drives cross-functional alignment, and continuously improves execution performance across the organization Bachelor in Computer Science, Software Engineering, Electrical Engineering, Information Technology, or a related technical field Solid understanding of business–economic correlations, cost structures, and scenario evaluation Extensive experience driving structured execution of complex, cross-functional development projects, ensuring transparency, alignment, and methodical governance Experience coordinating or leading interdisciplinary technical development projects (mechatronic, embedded, system-level or cross-functional Strong proficiency with project management tools (e.g.
Open for change and feedback is what defines our culture.We support you on your journey: individual learning opportunities, world-wide job opportunities or technical training from our academy.The safety and well-being of our employees is important to us, which is why we set high standards for your workplace safety.
Key Responsibilities Develop study-specific action plans with research sites to accelerate recruitment and support procedural training.Educate healthcare professionals and their staff on study protocols related to clinical trials.Partner with referral networks to identify potential trial participants.Maintain and analyze customer records to tailor strategies for pre-screening, screening, and enrollment.Complete internal reporting and organize group events to optimize program delivery.Address and manage objections effectively.Stay current with technical knowledge in relevant therapeutic areas. Qualifications Registered Nurse, other healthcare professional, or Clinical Research Associate (CRA) required.High flexibility to travel (including internationally if needed).Bachelor’s degree (BA/BS) in Health Sciences or related field, or equivalent qualifications.Located in Germany with fluency in German and English languages.1–2 years of relevant direct experience in working with research sites.Clinical competence in the therapeutic area.Excellent interpersonal and communication skills.Strong written and verbal communication skills.Ability to work independently and coordinate across multiple functions.Solutions-oriented approach and positive attitude.Strong customer service orientation and collaborative mindset.Demonstrates empathy and cultural awareness.Upholds the values of IQVIA and the CTE group.
As a software engineering professional, you will get involved in developing, designing and implementing solutions which include analyzing the functional and technical requirement to ensure it meet our customer needs. WHAT YOU WILL DO Be a key influencer to our business colleagues in resolving significant or potential issuesUnderstand your customer by gathering requirement, presenting concepts and proposal, providing updates on deliverables and negotiating issue resolution when neededAct as a coordinator across projects to monitor performance to ensure delivery of quality application on timeWork with external parties in assembling the system components with standardized modulesCustomizeCommercial Off-The-Shelf (COTS)based on pre-determined parameters, and execute customizing testsEnsure works are documented according to required standards, methods and toolsAssist in the define, initiate and design of architecture in projects/ program WHAT YOU SHOULD HAVE: 8 years hands-on experience in designing and developing solutions with Java /JavaScriptWorking experience and knowledge in Software Development Life Cycle (SDLC) with relevant qualification in IT fieldPassion in developing a high quality softwareInquisitive and analytical mind Strong IT and business acumenProven ability to work in a multi-cultural and multi-functional environmentCustomer and end-user focusedExcellent oral and written communications skills WHAT YOU WILL GET FROM US Great team of IT professionals with global working exposure On-going professional and technical training and certifications Global internal job opportunities available within DPDHL A multicultural environment in modern offices Meal Card and Flexible Benefits – customized according to individual needs Choose any day for your vacation from earned public holiday (Saturday and ad hoc) Smart casual dress code everyday Unlimited Outpatient Medical Home office possibilities Sounds good?
As Team Lead for SCADA Software Deployment (m/f/d), you ensure the successful commissioning and handover of SCADA systems in wind farms worldwide. You lead an international technical team and coordinate deployment, support and continuous improvement activities. Your role is essential for enabling reliable data flow, operational readiness and a smooth transition into service operations.
You support our technical training team by organizing materials, managing equipment, and helping to digitize and improve training content. In this role, you work closely with trainers, contribute to efficient workshop operations, and help develop structured and modern training documentation.
We support you on your journey: individual learning opportunities, world-wide job opportunities or technical training from our academy. The safety and well-being of our employees is important to us, which is why we set high standards for your workplace safety.
Perform cost-down and value engineering activities to establish cost-effective production processes, identifying opportunities for optimization and improvement. Perform statistical and technical analysis on production failures, identifying root causes and implementing corrective actions to improve production capability.
SUMMARY Would you like to be part of DHL IT Services? Our Infrastructure Engineering team is looking for a new technical star. You will run, develop and grow our global, multi-cluster Red Hat OpenShift container platform that sits at the heart of DHL digitalization strategy and brings a new dimension of speed, flexibility and efficiency to DHL.
We are seeking for a talented Enterprise Architect – Tools and Monitoring to join our team. You are expected to deliver technical and architecture design and formulate standards related IT monitoring landscape (Infrastructure, Application and Business Process).
Collaboration and Communication: Work closely with stakeholders, including business users, IT teams, and external partners. Communicate technical information to non-technical stakeholders, ensuring clear understanding of application capabilities and limitations. Documentation and Knowledge Management: Develop and maintain documentation for applications, including design documents, user guides, and technical notes.
HP-UX and AIX just as an advantage.Knowledge of VERITAS Infoscale (formerly Storage Foundation) and other Veritas productsKnowledge of cloud services Microsoft Azure and/or Amazon Web Services (AWS)Knowledge of shell scripting, Perl or Python programming languagesExperience in a large, multi-vendor, computing environment preferableResults oriented and driven by goal achievement with a strong focus on high qualityAbility to work independently and learn new things quickly WHAT YOU WILL GET FROM US ·Great team of IT professionals with global working exposure ·Meal Card and Flexible Benefits – customized according to individual needs ·On-going professional and technical training and certifications ·A multicultural environment in modern offices ·Choose any day for your vacation from earned public holiday (Saturday and ad hoc) ·Smart casual everyday ·Global internal job opportunities available within DPDHL ·Unlimited Outpatient Medical ·Home office possibilities Sounds good?
Ability to read blueprints and understand technical specifications of parts and sub-assemblies Proficiency in application of manufacturing processes including welding, plating, grinding, electro polishing, CNC machining and fabricating.
In this role, you take direct responsibility for site activities, safety standards, and timely commissioning. The focus is on the technical supervision and coordination of external contractors on site. YOUR TASKS You consistently implement HSE and safety requirements on site and intervene decisively in case of violations You provide technical supervision of contracted companies during the execution of electrical installations on wind turbines You ensure required quality and output levels and immediately initiate corrective actions in case of deviations You ensure timely completion of electrical works to enable proper commissioning of the wind energy installation You review system-related reports for completeness, accuracy, and up-to-date technical documentation You actively participate in project and site meetings and contribute your expertise as Electrical Supervisor You record defective or missing components and promptly communicate requirements to the site management YOUR PROFILE Completed vocational training as an electrician, mechatronics technician, or an equivalent technical qualification Willingness to undertake multi‑week assignments on construction sites as well as regular Saturday work High willingness to travel mainly within Germany and occasionally to Austria and the Netherlands Fitness for working at heights, confined wprking spaces, good physical condition, and a strong safety-oriented mindset Solid PC skills, especially in MS Office and handling technical documentation Good command of English, both written and spoken, for international cooperation Valid driving license class B and a structured, resilient, and solution-oriented working style Posting date: 11.02.2026 Start date: as soon as possible Pay grade: FK IV–V Scope: full-time Manager: Marko Schmidt Department: Site Supervision Central DEINE BENEFITS Nordex bietet eine Vielzahl an attraktiven Benefits – hier findest du einen Auszug dessen, was Dich bei uns erwartet.
In this role, you take direct responsibility for site activities, safety standards, and timely commissioning. The focus is on the technical supervision and coordination of external contractors on site. YOUR TASKS You consistently implement HSE and safety requirements on site and intervene decisively in case of violations You provide technical supervision of contracted companies during the execution of electrical installations on wind turbines You ensure required quality and output levels and immediately initiate corrective actions in case of deviations You ensure timely completion of electrical works to enable proper commissioning of the wind energy installation You review system-related reports for completeness, accuracy, and up-to-date technical documentation You actively participate in project and site meetings and contribute your expertise as Electrical Supervisor You record defective or missing components and promptly communicate requirements to the site management YOUR PROFILE Completed vocational training as an electrician, mechatronics technician, or an equivalent technical qualification Willingness to undertake multi‑week assignments on construction sites as well as regular Saturday work High willingness to travel mainly within Germany and occasionally to Austria and the Netherlands Fitness for working at heights, confined wprking spaces, good physical condition, and a strong safety-oriented mindset Solid PC skills, especially in MS Office and handling technical documentation Good command of English, both written and spoken, for international cooperation Valid driving license class B and a structured, resilient, and solution-oriented working style Posting date: 11.02.2026 Start date: as soon as possible Pay grade: FK IV–V Scope: full-time Manager: Marko Schmidt Department: Site Supervision Central DEINE BENEFITS Nordex bietet eine Vielzahl an attraktiven Benefits – hier findest du einen Auszug dessen, was Dich bei uns erwartet.
Ability to read blueprints and understand technical specifications of parts and sub-assemblies Proficiency in application of manufacturing processes including welding, plating, grinding, electro polishing, CNC machining and fabricating.
Your assignments Water treatment and desalination projects: study, design and supervision Short- and medium term assignments in English and/or French/Spanish speaking countriesCoordinate and expand desalination expertise within the organisation Your responsibilities Studies, design, tender documents and supervision for water desalination projects Being part of multidisciplinary teams Management of technical deliverables and reporting Your profile University degree in engineering or degree of similar level (B.Sc., M.Sc., PhD)At least 5 years of profound professional experience in desalination (SWRO)Experience with other technologies (MED, MSF), would be an advantage Experience in process and hydraulic engineering in water supply Experience relevant to assignments in developing countries desirableVery good command of the English and/or French/Spanish languagePrepared for worldwide travelling Flexible attitude We offer Interesting international projects (public and private Clients)Friendly international working environmentWorking in multidisciplinary teamshigh degree of personal responsibility Period of appointment: unlimited, the position is also available for freelance experts.
Participates in quality efforts by inspecting components and functional items on checklist and signs off on machine Provide technical support for field service technicians during installation of the machine Your Qualifications Associate's degree (A. A.) or equivalent from two-year college or technical school 3 to five years complex electro mechanical equipment assembly experience.
About us Your Contribution Factory and production line setup - projects: Is responsible for screening and qualifying suppliers to ensure technical capabilities, engineering and manufacturing capacity and competitive pricing.Production Technology Development: Is responsible to develop and optimize technologies and processes to enable our Consumer electronic and Photonics applications roadmaps, with focus on scalability, CapEx efficiency, equipment flexibility for multi program usage.Scouting of new production technologies: Is responsible for evaluation of new production technologies with the potential to disruptively improve quality and/or cost of optical components products.Technology Center Responsible to build-up and run our optical components technology center to be able to evaluate and develop disruptive technologies and sample optical components products for new customers.Leadership Leads his/her organization in China, defining clear roles and responsibilities, leveraging the strengths of SCHOTT network developing and delivering solutions best in quality and cost.Duties: Ability to develop high performance team with strong technical and communication skills (China & South of Asia).
We support you on your journey: individual learning opportunities, world-wide job opportunities or technical training from our academy. The safety and well-being of our employees is important to us, which is why we set high standards for your workplace safety.
Participates in quality efforts by inspecting components and functional items on checklist and signs off on machine Provide technical support for field service technicians during installation of the machine Your Qualifications Associate's degree (A. A.) or equivalent from two-year college or technical school 3 to five years complex electro mechanical equipment assembly experience.
RRC Power Solutions Vietnam plays a key role in our global manufacturing and quality strategy and works in close alignment with our headquarters in Germany.The Production Process Engineer is responsible for ensuring successful execution of production activities. The focus is on technical and process issues: Plan, organize and execute efficient equipment and process Maintenance to ensure excellent manufacturing processes.
You thrive in multicultural environments and know how to foster collaboration across diverse teams. Technical Know-how: You have solid knowledge of consumer electronics, optics, and AR technologies, enabling you to confidently engage in technical discussions and translate complex concepts into customer value.
Plan and execute load assessment tasks for research, sales, and service-related projects using advanced aero-elastic simulation tools. Provide expert technical input to development projects by integrating real site-specific load insights. Prepare clear technical reports and documentation summarizing analyses and results.
Design, develop and deploy digital solutions ensuring the software development life cycle in an agile setup. Create technical documentation. Analyze and decompose business requirements into technical functionalities. Produce clean and efficient code based on business requirements and specifications.
Partner with Corporate Center finance stakeholders to analyse closing processesMap existing workflows and identify automation and AI opportunitiesAssess data sources and define required system or data changesTranslate findings into clear technical and process improvement specificationsCollaborate with IT, data, AI and delivery teams to implement changesSupport process redesign and continuous improvement Communication, stakeholder management, especially with senior managementStrong technical understanding, including SAP FICO and group reportingSolid experience as a Business AnalystStrong analytical and process mapping skillsExperience applying AI, robotics automation, or lean/process redesignKnowledge of consolidation and Corporate Center finance processesSolid English communication, German advantageousCombined technical and business background Opportunity to shape automation, AI, and modern financial processesDynamic, international, and cross-functional work environmentProfessional growth through complex process and system improvement workHays helps you gain a foothold in innovative companies Ihr Kontakt Referenznummer 866054/1 Kontakt aufnehmen Telefon:+41 44 225 50 00 E-Mail: positionen@hays.ch Anstellungsart Freiberuflich für ein Projekt
Ipetronik GmbH & Co. KG sucht in eine/n Technical Support Engineer (m/w/d) (ID-Nummer: 13663986)